Requests for Pics..Here they are

billqaudiovideo · 03-29-2004, 08:13 AM

I have gotten numerous requests for pics. I finally had some good weather to take a few shots this morning. The truck has the 2 1/2 lift Daystar in front. I added the Westin Brush Guard, A Billet Grille Assembly Upper and Lower, 18" Chrome American Racing Wheels and Nitto 325/60/18 Tires. The truck also rides with factory XM which works Flawlessly. I have the sliding toolbox and bed extension. I will be ordering the Banks exhaust and Volant Air Intake system this week. Sorry to all that have been waiting for these pics....

Texas Titan · 03-29-2004, 08:19 AM

Quote:

Originally Posted by billqaudiovideo

I have gotten numerous requests for pics. I finally had some good weather to take a few shots this morning. The truck has the 2 1/2 lift Daystar in front. I added the Westin Brush Guard, A Billet Grille Assembly Upper and Lower, 18" Chrome American Racing Wheels and Nitto 325/60/18 Tires. The truck also rides with factory XM which works Flawlessly. I have the sliding toolbox and bed extension. I will be ordering the Banks exhaust and Volant Air Intake system this week. Sorry to all that have been waiting for these pics....

Your truck looks GREAT!! How is the handling with the front lift kit?

bestatchess · 03-29-2004, 08:25 AM

Quote:

Originally Posted by billqaudiovideo

I have gotten numerous requests for pics. I finally had some good weather to take a few shots this morning. The truck has the 2 1/2 lift Daystar in front. I added the Westin Brush Guard, A Billet Grille Assembly Upper and Lower, 18" Chrome American Racing Wheels and Nitto 325/60/18 Tires. The truck also rides with factory XM which works Flawlessly. I have the sliding toolbox and bed extension. I will be ordering the Banks exhaust and Volant Air Intake system this week. Sorry to all that have been waiting for these pics....

Where did you get the billet grille? It covers the lower opening also, right? Is it metal or chrome plastic? I was taking small gravel through the lower opening into the heat exchanger fins, so I covered it with a piece of screen, but the grill looks nicer.

billqaudiovideo · 03-29-2004, 08:26 AM

Handles just fine..The alignment was also in spec afterwards. I do notice a little more sway when driving on very windy days but not much different from stock

Quote:

Originally Posted by Texas Titan

Your truck looks GREAT!! How is the handling with the front lift kit?

billqaudiovideo · 03-29-2004, 08:29 AM

Ebay.... $150.00 made of aluminum...very nice here is a link http://cgi.ebay.com/ebaymotors/ws/eB...tem=2469598491

Quote:

Originally Posted by bestatchess

Where did you get the billet grille? It covers the lower opening also, right? Is it metal or chrome plastic? I was taking small gravel through the lower opening into the heat exchanger fins, so I covered it with a piece of screen, but the grill looks nicer.

slick · 03-29-2004, 08:38 AM

Quote:

Originally Posted by billqaudiovideo

Handles just fine..The alignment was also in spec afterwards. I do notice a little more sway when driving on very windy days but not much different from stock

hey bill that truck is the bomb, thinking about the lift on mine but dont trust to many people with the alignment, i cant believe the align was still in spec im wondering if everybody else that lifts there 4x4 will have the same luck, if so il give it a shot.

billqaudiovideo · 03-29-2004, 08:47 AM

Thanks...I was worried also about the lift but I chose a local 4x4 company and he said it was alot like the new F150 and he has done alot of those. He charged me 100.00 which I was fine with ..It took him about 2 hours......The funny thing is he is a domestic truck person so he was giving me a hard time about the Titan but after working on it he was impressed with the quality. He also had to call his buddy with a new Hemi over and they ran them down the street and of course the Hemi wasn't what the owner thought it was. So I think we have found a new believer or two out there

Quote:

Originally Posted by slick

hey bill that truck is the bomb, thinking about the lift on mine but dont trust to many people with the alignment, i cant believe the align was still in spec im wondering if everybody else that lifts there 4x4 will have the same luck, if so il give it a shot.

Howie Kaluha · 03-29-2004, 09:20 AM

Quote:

Originally Posted by billqaudiovideo

I have gotten numerous requests for pics. I finally had some good weather to take a few shots this morning. The truck has the 2 1/2 lift Daystar in front. I added the Westin Brush Guard, A Billet Grille Assembly Upper and Lower, 18" Chrome American Racing Wheels and Nitto 325/60/18 Tires. The truck also rides with factory XM which works Flawlessly. I have the sliding toolbox and bed extension. I will be ordering the Banks exhaust and Volant Air Intake system this week. Sorry to all that have been waiting for these pics....

You got the brush guard from westinautomotive.com ??? (just wondering cause I want to get one like that when I get my Titan as well)

ttz32 · 03-29-2004, 09:50 AM

Wow, that truck looks badass! Those tires just set it off.

Optimist · 03-29-2004, 11:41 AM

Very Nice! I wonder if a 4x2 with the 2.5 lift would allow for this size set up?
I think the 4x4 sits 1.6 or so higher stock than the 4x2.

bvstone1 · 03-29-2004, 12:04 PM

Quote:

Originally Posted by billqaudiovideo

Ebay.... $150.00 made of aluminum...very nice here is a link http://cgi.ebay.com/ebaymotors/ws/eB...tem=2469598491

how hard was it to get the nissan emblem back on the front? How long did install take? That's nice!

mtbendo · 03-29-2004, 12:44 PM

Absolutely stunning! That all I have to say... Ok, may I have something else to say. How does the angle of your front drive shafts look?

billqaudiovideo · 03-29-2004, 01:02 PM

yes...Westin but I bought mine from ebay....

Quote:

Originally Posted by Howie Kaluha

You got the brush guard from westinautomotive.com ??? (just wondering cause I want to get one like that when I get my Titan as well)

billqaudiovideo · 03-29-2004, 01:03 PM

Very simple to install...Just removed stock nissan emblem..which is double sided taped on and drilled two small holes in back side and used a wire tie thru holes and grille. total install took 30 mins.

Quote:

Originally Posted by bvstone1

how hard was it to get the nissan emblem back on the front? How long did install take? That's nice!

bvstone1 · 03-29-2004, 02:28 PM

Quote:

Originally Posted by billqaudiovideo

I have gotten numerous requests for pics. I finally had some good weather to take a few shots this morning. The truck has the 2 1/2 lift Daystar in front. I added the Westin Brush Guard, A Billet Grille Assembly Upper and Lower, 18" Chrome American Racing Wheels and Nitto 325/60/18 Tires. The truck also rides with factory XM which works Flawlessly. I have the sliding toolbox and bed extension. I will be ordering the Banks exhaust and Volant Air Intake system this week. Sorry to all that have been waiting for these pics....

I checked out the grill on ebay and it looks really nice.. I read the sellers feedback and the only negatives were that it was mounted with zipties. In your opinion, do you feel this is a little hokey? Or does it seem to work just fine that way? When looking at the part close up, does it look cheezy in the least bit?