Titan Pictures & Media Post
Post pictures, media, etc. about the Titan that you find in here. Also -- Please see the Nissan Titan Photo Gallery - All users have access:!
i want to put 33's on my titan because i dont want the rear end problems, or the gas drama.. i saw an F-250 with like an 11 inch lift with 33x12.5x17 toyo m/t and it looked pretty good, not all huge like they usually look, but with the wheel wells on the titan being very big would 33's and a 6.5 lift look stupid? (cst spindle and a leveling block=6.5 front/1.5 block=4.5 rear)
I will try to get pics up tomorrow - i still have my 33's on after finishing up the lift
__________________
2004 XE 4x4 CC OR
6" Pro Comp lift with SAW's
Deaver Springs in the Back with Bilsteins - thanks PRG!!
Bumpin Sub box and Sundown Amp thru Tech12Volts!!!
33x12.50/17 Mickey Thompson MTZon Factory OR wheels
Cherry Bomb Extreme Exhaust
I know you wanted pics of a 6" lift but I happened to have 33's at one time with my CST 8" lift. The tires are 295/70/17 nitto grapplers.
where did u get ur tires at?
i didnt kno nitto made the terra grapplers to fit a 17, i thought they only started at 18..
and in the first picture the rear of ur truck looks lie it sits about 2 inches lower, but it is the opposite in all ur other pictures. nice truck though, it will be 33's for me, because the 35's do make the truck look squatty and thats not what i want.
the one on 22's looks good also, but im on 17's so that not a good comparison tool thanks alot for the pics though!!
where did u get ur tires at?
i didnt kno nitto made the terra grapplers to fit a 17, i thought they only started at 18..
and in the first picture the rear of ur truck looks lie it sits about 2 inches lower, but it is the opposite in all ur other pictures. nice truck though, it will be 33's for me, because the 35's do make the truck look squatty and thats not what i want.
the one on 22's looks good also, but im on 17's so that not a good comparison tool thanks alot for the pics though!!
anymore pics would be appreciated!!
I had purchased that set of tires thru discount tire. The first picture is the day I had my truck lifted. I am sure the front still needed to settle down some. Here is the link for the tires http://www.discounttire.com/dtcs/sea...95&ar=70&rd=17
__________________
check out my trucks transformation.
thanks for the link!
much cheaper than 35's also.
how high was the front compared to the rear before it got settled down because that is the angle i want my truck at. i only want to go 6 or 7 in the front though, im not as B.A. as you haha jk i have to say i love your truck though
thanks for the link!
much cheaper than 35's also.
how high was the front compared to the rear before it got settled down because that is the angle i want my truck at. i only want to go 6 or 7 in the front though, im not as B.A. as you haha jk i have to say i love your truck though
Thanks...I am not a B.A. just a "poser" who drives a lifted 2wd 99.9% on the street. The CST kit I have comes with 6" spacers for the front to give you an 8" lift up front and 4" blocks for the rear. I chose to go with foxcoilvers instead of using the spacers for the front.
__________________
check out my trucks transformation.
haha well my sponsors dont pay me to mess up my truck lol they pay me to ride.
how much did ur paint job cost?
The flames alone are 1-1.2K depending how far back you go with them. I had the same shop work the fiberglass to fit better to the body lines so that was another 2K. I prolly could have had it done cheaper but this place is one of very few in the same area and I did not have to drive down the hill into L.A.
__________________
check out my trucks transformation.
AutoForums.com is the premier network of enthusiast-owned
enthusiast-operated automotive communities.
We operate more than 100 automotive forums where our users consult peers for shopping information and advice, and share
experiences and opinions as a community.