Just installed spindles/deavers/saws....PICS!!!!

[06_SMOKE_SE_CC]

hey just got back from greg's with some new goodies...

got some 4" spindles for the front and some 2.5" deavers for the rear along with some new SAW piggybacks for the rear....was too dark to take pics by the time i got back tonight, but i'll take some and post them up tomorrow....

so far, the truck seems awesome....really good ride, the SAWS in the rear are AMAZING just as everyone else who has them has said....much better than the dr's i had back there for the last 5k miles (which i will be selling, just incase anyone is looking for a set of these)....

i'm sitting at 7" of lift in the front and about 2.5" of lift in the rear, it sits a little bit higher in the front....(gotta rep the escondido rake since i'm from san diego and in arizona against my will, damn house prices)i'm loving it...looks great, rides great...

now i just need to get some 35" toyos m/t's or bfg km1's and some 17" wheels to keep them on...

pics tomorrow


EDIT: forgot to mention that greg pulled off the radflos in the front and revalved them for me, which was a nice surprise/extra...he said the driver's side was all f*cked up, that there was shock oil where the nitrogen should be, and that there was a rubber grommet that was missing...but not anymore....i noticed a big difference in the ride after he revalved them, smoother and a little quieter...

thanks again greg for the greg service...i'll be back as soon as i can to get the SAWS in the front, as you suggested...

[motorvisions]

hey evan - are the longer sides of your deavers mounted towards the front of your truck? im having some shutter with mine - someone said they may be installed wrong

[06_SMOKE_SE_CC]

Originally Posted by motorvisions

hey evan - are the longer sides of your deavers mounted towards the front of your truck? im having some shutter with mine - someone said they may be installed wrong

hey john, just went out and checked and the longer sides are towards the front...hope this helps...

[06_SMOKE_SE_CC]

here they are, as promised....

spindle installed


SAW and deaver installed


comparison between radflos in front/dr replacement in rear vs. spindles/radflos in front/2.5" deavers/SAWS in rear



here's some pics in the dirt lot across the street from my house






hope you enjoy the pics...i wanna take it out to sycamore sometime soon to test it out some, and i'll post some pics from that whenever i go....

[hooligan]

looks much better E!!! what? no props to PRG for revalving the front radflizzows? got to greg's late afternoon so you were already on yer way back to Zona, sorry to have missed ya. btw, looks like you need some TC UCAs.....

[06_SMOKE_SE_CC]

Originally Posted by hooligan

looks much better E!!! what? no props to PRG for revalving the front radflizzows? got to greg's late afternoon so you were already on yer way back to Zona, sorry to have missed ya. btw, looks like you need some TC UCAs.....

hey hoolie, just edited my first post and mentioned the revalve...

yeah, i wanted to hang around til you got there, but also wasn't too keen on making the 6 hour drive any later than i had too...sucks too cause i had 3 new shirts with me that we just got in the night before....also, i think i'm gonna go with greg's uca's when i get the chance, gonna upgrade to those and some SAWS for the front....

[hooligan]

Originally Posted by 06_SMOKE_SE_CC

hey hoolie, just edited my first post and mentioned the revalve...

yeah, i wanted to hang around til you got there, but also wasn't too keen on making the 6 hour drive any later than i had too...sucks too cause i had 3 new shirts with me that we just got in the night before....also, i think i'm gonna go with greg's uca's when i get the chance, gonna upgrade to those and some SAWS for the front....

LOL, i just read it... "greg service"??? hahahaha.... btw, i was looking at greg's truck... didn't see a d-threat logo on it anywhere... ....

daamn, 6 hour drive? only an hour drive from the home of the rake... hehe, you need to move back...

[motorvisions]

Originally Posted by 06_SMOKE_SE_CC

hey john, just went out and checked and the longer sides are towards the front...hope this helps...

thanks - yeah i was just making sure. someone said mine were on backwards, though i was pretty certain they were not. truck is looking sick, love my spindles & SAWs, now i need some coilovers and an endless list of more upgrades.

[kttnmthking]

truck looks great man.. im jealous. when you upgrade to the SAW's let me know and ill take those radflos off your hands

[novak57]

SAW-eeet.Yeah, i know i need to take pics of my mini kit. I almost want to say that its more stiff, responsive on the road. What happened to your dr's....hint hint

[06_SMOKE_SE_CC]

Originally Posted by novak57

SAW-eeet.Yeah, i know i need to take pics of my mini kit. I almost want to say that its more stiff, responsive on the road. What happened to your dr's....hint hint

hey, i still got 'em, gonna sell those if you want to buy....i think andrew is gonna come by on friday to hang my exhaust, if you wanna come down this way, then he said he can fix yours then too, and you can pick up the dr's too...

[norwaysninja]

Originally Posted by 06_SMOKE_SE_CC

hey hoolie, just edited my first post and mentioned the revalve...

yeah, i wanted to hang around til you got there, but also wasn't too keen on making the 6 hour drive any later than i had too...sucks too cause i had 3 new shirts with me that we just got in the night before....also, i think i'm gonna go with greg's uca's when i get the chance, gonna upgrade to those and some SAWS for the front....

Whats the reason to switch to the SAWs up front? Is there somthing wrong with the Radflos?

Sweet Truck and Company Logo!

Eric

[06_SMOKE_SE_CC]

Originally Posted by norwaysninja

Whats the reason to switch to the SAWs up front? Is there somthing wrong with the Radflos?

Sweet Truck and Company Logo!

Eric

nah, nothing wrong with the radflos at all, the SAWS are just a bigger/better shock....

thanks for the props on the logo as well....we're looking to get some smaller stickers made with our website on them for people to slap on their trucks/bikes/windows/girlfriends....

[SDTitan1]

truck looks good dude, 'bout time you went with the spindle!

[Molson]

Looks good! i need to get me a set of SAWS bad!