Power window problems

Kansas City Titan · 07-09-2004, 08:45 AM

Has anyone had any problems with their passenger window not wanting to roll-up when you hit the button on either door. The window trys to go down lower than stops. It will not go up, unless you hold down the switch for it to find its reference point I guess. Then the window will roll-up like it should.

Tom

Grok · 07-09-2004, 09:10 AM

I had a problem where my window went down but would not come up initially. Then after clicking it a few times it worked.

zpylot · 07-09-2004, 09:28 AM

Quote:

Originally Posted by Kansas City Titan

Has anyone had any problems with their passenger window not wanting to roll-up when you hit the button on either door. The window trys to go down lower than stops. It will not go up, unless you hold down the switch for it to find its reference point I guess. Then the window will roll-up like it should.

Tom

Yep, I do. It's my only problem so far. With my past experiences with service depts. taking apart my doors I am holding off until I can figure it out and fix it myself.

I had an Acura MDX before the Titan and Elk Grove Acura really messed up both my front doors, so bad that when it rained really hard or I washed the MDX the pockets inside the doors would fill up with water.

Tony · 07-09-2004, 12:02 PM

Happened 2-3 times to me.
I just turned the ignition off then restarted the engine. It seems recycling power resets it.

cgoulette · 07-09-2004, 01:40 PM

I have the same problem. The trick is not to Flick the switch. If you slowly pull up on the switch and hold it for a second you will never get this problem. I have the problem in both windows, but since I've been trying my workaround, the problem has not come back. They defintely need to fix it, since I'm use to just flicking the switch up (to do the auto-roll up of the window).

Deepwater · 07-10-2004, 08:06 AM

Had the same problem as you, the dealer installed a new BCM but this did not fix my windows, they were still not working right.
Nissan then told the dealer that the BCM that they sent out did not have the New programing in it! GO FIGURE!
So they had to to reflash it, they downloaded they program from Nissan.
After they had installed the new program in the BCM I have not had one prolebm with my windows not working right! and this was back in April.
So everybody go and get your windows fixed!
Just thought that I would let everybody know this.