Problems W/ Prg Or Ncd?

**goathead** · 08-17-2007, 02:16 PM

anybody ever had any problems/failures w/ their NCD or PRG spacers? im not talking about coil bucket clearance issues. im talking about the spacer itself exploding/imploding, cracking, or failing in any way. just wondering. my NCD spacers are holding up just fine.

Sammy Sandbag · 08-17-2007, 02:19 PM

I'm not sure how a solid chunk of billet aluminum under compression would just explode. Cheep cast blocks (rear) have been known to crack, speaking from personal experience. But I'll entertain your curiosity by saying my PRG spacers look like the day I put them on after 4 years of use, same goes for my rear blocks from PRG and also Greg's traction bars.

SDTitan1 · 08-17-2007, 02:31 PM

agreed Sammy, exploding/failing billet leveling kit is not gonna happen.....especially because it's a cosmetic enhacement to the truck, not something used as a platform for off-roading or beating up the truck (although you could beat it up pretty fuggin good)

**goathead** · 08-17-2007, 03:33 PM

just putting this out there to find out if there has been, as unlikely as it may be.

**goathead** · 08-18-2007, 03:10 PM

anybody else heard of this happening to anyone that they know of?

Brundy · 08-18-2007, 07:38 PM

I bought a used PRG kit , and while installing it, I broke 1 of the studs that came with them. Upon inspection, it had been cracked for some time. I used bolts instead. Otherwise, since both kits are identical aluminum blocks, there is nothing else to fail. Buy either kit.

**goathead** · 08-20-2007, 08:59 AM

good info, thanks for sharing.