I finally set aside some time to drop off my truck at the dealership and get the rear door wiring harness recall taken care of. I also had a couple other issues looked at, but I will save those details for another thread once I do a little research and have a better understanding of how to approach those matters.
Now that the recall has been performed, When ever I open or close the rear doors I get a scrubbing noise. The harness is now rubbing up against the body every time the door is opened and closed. It is also tugging on the weather stripping around the door. It looks to me like the harness was improperly installed. I am guessing that the harness is supposed to be positioned on the other side of the hinge post, but I do not remember how it was prior to the repair. Attached are a couple of pics. It would be greatly appreciated if anyone could compare these photos to how your "post recall" harness looks and let me know if it is or is not correct...or if I am just going crazy.
__________________
05 KC SE 4x2 FFV, smoke, no big tow. Mods: Bully Dog Power Pup, JBA catback, S&B GEN 3 CAI, Hellwig HD traction springs, Nasta nerf bars, Kenwood KSC-SW1 powered sub, Grilleguy lower bumper insert, Autoenginuity/enhanced Nissan software. Latest 1/4 mile time of 14.660@93.14 MPH running BD reg 87 tune +2 timing and DA@1830' in FST. JBA catback soundclip, just some revs: http://www.vimeo.com/634077
Is it just me or does the dealer fix consist of some corrugated wire cover and about 90 feet of electrical tape?????
Not a very professional fix in my opinion from Nissan. I was expecting to see something new.
No, it's 50' of tape over a plastic corrugated sheathing...lol.
__________________
05 KC SE 4x2 FFV, smoke, no big tow. Mods: Bully Dog Power Pup, JBA catback, S&B GEN 3 CAI, Hellwig HD traction springs, Nasta nerf bars, Kenwood KSC-SW1 powered sub, Grilleguy lower bumper insert, Autoenginuity/enhanced Nissan software. Latest 1/4 mile time of 14.660@93.14 MPH running BD reg 87 tune +2 timing and DA@1830' in FST. JBA catback soundclip, just some revs: http://www.vimeo.com/634077
I had mine done a while back , and i thought it looked like a sh!tty job to. Nissan could have used a new rubber connector and had a lot nicer looking job.
AutoForums.com is the premier network of enthusiast-owned
enthusiast-operated automotive communities.
We operate more than 100 automotive forums where our users consult peers for shopping information and advice, and share
experiences and opinions as a community.