Anybody with an 06 get a recall notice?

swellman · 02-15-2008, 05:25 PM

Hi group,
Just got a card saying thay my 06 needs to be taken to the shop for a recall. I moved and did not get the letter. I will call tomorrow and try to find out what it is that the truck needs but if anyone knows could they please let me know? Thanks.
Best Regards,
Shawn

stnjohnson · 02-15-2008, 09:13 PM

I don't have a recall notice, but I have moved since buying mine, so maybe the notice didn't get to me. I'm interested in hearing what they say to you.

Tiwaz · 02-15-2008, 11:58 PM

I got one. Called the dealer. They said it doesn't apply to mine.

**Carbeaux** · 02-16-2008, 05:01 AM

I haven't gotten anything. Looks like there have been 3, at least on my KC model:

http://x.nissanhelp.com/forums/Knowledgebase/links/328

stnjohnson · 02-16-2008, 06:23 AM

This would apply to non KC trucks.

VOLUNTARY SERVICE CAMPAIGN 2006 NISSAN TITAN, ARMADA; FRONT AXLE FLANGE BOLTS (4WD)
On some 2006 model year Nissan Titan and Armada four-wheel drive equipped vehicles, there is the possibility that the bolts attaching the front drive shafts to the front final drive assembly may not have been tightened properly. This may result in the front drive shafts coming loose and cause a vibration or noise in the vehicle front end. If the front drive shaft becomes disconnected, it may be damaged or cause damage to other vehicle components. However, the ability to control the vehicle will not be affected. Nissan is conducting a Service Campaign to retighten the front drive shaft bolts to the proper specification.

swellman · 02-16-2008, 08:11 AM

STNjohnson,
That is what it is. I called today and they confirmed they need to retighten my bolts. No biggy. I haven't felt anything that would hint towards being loose but I will have it done anyway. Thanks all.

Shawn

stnjohnson · 02-17-2008, 08:28 AM

Thanks Swellman, I'm going to see if that applies to mine.

70DATSUN · 02-19-2008, 07:21 PM

I haven't received anything yet. Mines a 4x4, have had no problems yet. Anyone know what the torque setting are? I'll do it myself.

Jared · 02-20-2008, 09:00 PM

the axle flange bolt recall is pretty old, doubt you just got a card for it.

swellman · 02-26-2008, 02:55 PM

Well, went to the shop today and had my axle bolts looked at and all checked out good. Don't know why it took so long to get the notice? Anyway, all is good and the next thing is a flush of the drive line fluids!

Shawn