Possible Future Setup

MooseMoose · 10-19-2009, 10:48 PM

So im almost done with my interior mods and its about time to start thinking about the suspension. I already have the fabtech stage 1 lift and this is what im thinking about doing.

for the front I am thinking 2.5 Radflows, and PRG UCA's

For the rear the 2.0 Radflows, Deaver C-30 pack, and traction bars.

Does this set up sound pretty decent? Any thing i left out? Oh and im pretty sure this set up can fit 37's but will my 35's look too small with this set up?

Its going to be a while before i can start purchasing, but im just trying to get a good idea of what ill be spending..

Sean

**loufish** · 10-20-2009, 06:38 AM

35's will even rub unless you get the correct wheel....

What about the gearing?.....37's get tall with stock gears.

You don't NEED 37's, you just want them, correct?....

MooseMoose · 10-20-2009, 11:18 AM

Quote:

Originally Posted by loufish

35's will even rub unless you get the correct wheel....

What about the gearing?.....37's get tall with stock gears.

You don't NEED 37's, you just want them, correct?....

my 35's don't even rub right now... I've seen people with a similar set up and they have 37's and they look about right on the truck and I think 35's wouldn't look right.. And I really don't want to get 37's because of messing with gearing.

**yamatitan** · 10-22-2009, 07:17 PM

35's dont look bad at all, 37's will rub without pinch weld mod.

Same setup one with 35's

Then with 37's