PRG mini lift and factory 18s tire selection

Juggernaut72 · 05-02-2006, 07:03 PM

I am planning on getting Greg's mini lift with the 1" blocks for the rear. I plan to keep the stock 6 spoke 18s for now. What size tires can I run with after the lift? I see alot of threads talking about the 17s but none on the 18s...

THANKS

motoman139 · 05-03-2006, 06:16 AM

on the 18's because of the width, 325/60/18 (33x13.00/18) is about as tall as you could go. They will wear on the edges since they are so wide on the stock wheel but for the most part that is about your only option that I know of out there other than the 285/65/18 bfg's

ecbmxer · 05-03-2006, 05:01 PM

The Procomp Extreme AT's are about the widest thing I think you can get. They are 33x13.5-R18 and can be run down to an 8" wide rim. I would love to know if they fit a PRG performance lifted truck w/o rubbing!

Juggernaut72 · 05-03-2006, 06:59 PM

How about a BFG Mud-Terrain T/A® KM 35x12.50R18/D?

bigthingies · 05-03-2006, 07:24 PM

if you want to go with 35's you need to go with a wheel that is 11.5 or less. unless you put a 6 in lift or better on. i have seen a 35 in tire on a titan with just a leveling kit. it did rub just a bit when you made sharp turns and hit big bump. hope that helps

Juggernaut72 · 05-06-2006, 08:47 AM

This is Greg's on 17s why would the 18s be different?

d0va · 05-06-2006, 09:31 AM

Quote:

Originally Posted by Juggernaut72

This is Greg's on 17s why would the 18s be different?

is that with or with out the blocks on the rear....

thanks

Juggernaut72 · 05-06-2006, 10:04 AM

I think that is with the blocks in the rear (that is what I planned to do too)....