Greg strikes again!!!!!

socaldad · 05-31-2006, 07:54 PM

Greg installed my leveling kit today! Absolute 100% professional install, parts, and awesome customer service! PRG rocks!!!! :-) http://www.prgproducts.com

I'll be back to spend more $$$ as soon as I can wear out my tires and shocks.

Thanks Greg!!!

hooligan · 05-31-2006, 09:29 PM

LOL!! congratulations socaldad!!!

btw, that's how it all started for me!! a leveling kit! it's become an incurable disease, i must ease the pain with PRG parts!!!

Chris93Si · 06-02-2006, 02:33 AM

Leveling kit is like a gateway mod, you start out saying "yeah, I'll just do a leveling kit here and there". Before you know it your strung out on lift kits, traction bars, coilovers and expensive wheels and tires.

I think we need PRG rehab

socaldad · 06-02-2006, 07:23 AM

Quote:

Originally Posted by Chris93Si

Leveling kit is like a gateway mod, you start out saying "yeah, I'll just do a leveling kit here and there". Before you know it your strung out on lift kits, traction bars, coilovers and expensive wheels and tires.

I think we need PRG rehab

I agree, I wish I could have afforded more... Unfortunately I put all of my cash (secret stash) into the purchase of the truck... I figure a year of some freelance income should get me some real suspension upgrades. Gotta say though, the truck looks much better without the rake in the front end.

Roost - better pic attached:

socaldad · 06-02-2006, 09:48 AM

Quote:

Originally Posted by ShootinROOST

Much better pic. all Titans should look like this-

Sweet! Someday I'll be there...

cardesigner · 06-02-2006, 12:11 PM

It all starts with the PRG level. It's all over from there, pretty soon you'll be wanting more and more! Truck looks good!

DR Jon · 06-02-2006, 01:04 PM

Do you have the bed side glass on the truck too? Kinda hard to see in white. If so, any words of advice? I'm going to put mine on tomorrow.

TIA,

PrerunnerGreg · 06-02-2006, 07:41 PM

Funny, i just saw Jon on the Freeway this afternnon with his bedsides in the bed. The funny part is that i just ordered mine about 20 minutes before i saw him and I should have mine by tomorrow or monday. Are we gonna need a "glass-fendered-titan" section on TT soon?

streetstalkerwj · 06-02-2006, 08:25 PM

greg don't you have a kc? whos making glass for the kc? Glassworks?

pgthe1 · 06-02-2006, 08:28 PM

Quote:

Originally Posted by cardesigner

It all starts with the PRG level. It's all over from there, pretty soon you'll be wanting more and more! Truck looks good!

Funny thats how I started... PRG level kit... then fox coilovers and some deavers... then Long Travel lol... Once Greg get's his race truck linked, I will have DMZ copy the setup lol... Thanks Greg

bcsocaltitan · 06-03-2006, 09:16 PM

I put mine on today. Took more than 2 hours though. Still don't see why Greg suggests taking the sway bar attachment off. Did not see where it helped. The instructions do not tell you which attachment to remove. Since one nut was seized I removed the lower nut on the ball joint on one side and the upper nut on the other. Did not think it would make a difference but with the lower nut removed I had much better access to the strut bolt. BTW - the spindle bolt is 22 mm.

Overall it looks great. Off to get my alignment.

DR Jon · 06-03-2006, 09:24 PM

Quote:

Originally Posted by PrerunnerGreg

Funny, i just saw Jon on the Freeway this afternnon with his bedsides in the bed. The funny part is that i just ordered mine about 20 minutes before i saw him and I should have mine by tomorrow or monday. Are we gonna need a "glass-fendered-titan" section on TT soon?

Hey Greg, have you posted those pictures yet that you flashed to me on the freeway? Nice air!!!!

got_titan · 06-03-2006, 09:48 PM

greg, you been flashing again?? lol...lol