Prg Lift!!

Advocate07 · 03-23-2007, 11:58 AM

Alright guys about time, just got off the phone with greg and the order went through!

Radflow coilovers
CST 4'' spindle
Fabtech carrier bearings
4'' block kit
Pro comp rear shocks

Should get 8'' of lift, I'll post pics as soon as it's done! Ships out on monday and should take about 3 days, can't tell you how stoaked I am.

Titan R · 03-23-2007, 12:15 PM

Quote:

Originally Posted by Advocate07

Alright guys about time, just got off the phone with greg and the order went through!

Radflow coilovers
CST 4'' spindle
Fabtech carrier bearings
4'' block kit
Pro comp rear shocks

Should get 8'' of lift, I'll post pics as soon as it's done! Ships out on monday and should take about 3 days, can't tell you how stoaked I am.

Congrats! Can't wait to see some pics

Seeker_jeff · 03-23-2007, 12:28 PM

i also just talked to greg yesterday about the same kit, or the fabtech one. is your truck 4x4 or 4x2? get pics up asap please

Advocate07 · 03-23-2007, 03:27 PM

I didn't buy a kit.. lol it's a package deal with different parts equaling lift

xavier · 03-24-2007, 09:56 AM

I put a 6 inch lift with 20 inch PRO COMP EXTREME WHEELS ON 35X13.5X20 And boy did it make my truck look sharp i also got 2.5 radflos from greg .8 inches is going to make your truck look like a champ try to get some sleep the days will go by faster ..

i<3mytitan · 03-24-2007, 12:27 PM

Quote:

Originally Posted by Advocate07

Alright guys about time, just got off the phone with greg and the order went through!

Radflow coilovers
CST 4'' spindle
Fabtech carrier bearings
4'' block kit
Pro comp rear shocks

Should get 8'' of lift, I'll post pics as soon as it's done! Ships out on monday and should take about 3 days, can't tell you how stoaked I am.

congrats!

not to be a d**k, but how is that going to equal 8"? I see 6" w/ the radflos and spindle...

Advocate07 · 03-24-2007, 03:19 PM

I'm not sure.. just the words from Greg. I could've quoted him wrong though, maybe up to 8'' of lift..

Titan R · 03-24-2007, 03:28 PM

Quote:

Originally Posted by Advocate07

I'm not sure.. just the words from Greg. I could've quoted him wrong though, maybe up to 8'' of lift..

Greg's good with his math too so if he says you'll get up to 8" I'm sure that's what you'll end up with.

Seeker_jeff · 03-24-2007, 03:32 PM

are you gettin it installed as soon as you get it? or doing it yourself? how much ya paying if getting it done?

Advocate07 · 03-24-2007, 03:59 PM

I wish I could do it myself, don't have the necessities to do it though.. Ya I'll probably get it installed the day after it all comes in, I'm hoping it'll be done by Friday/Saturday of next week

AgTitan06 · 03-24-2007, 04:05 PM

Quote:

Originally Posted by i<3mytitan

congrats!

not to be a d**k, but how is that going to equal 8"? I see 6" w/ the radflos and spindle...

Spindle = 4"
Radflos can be cranked 1-4" on 4x2.

= 8"

BTW, Greg sends this with 2" of lift, but you can adjust them down to 1" or up to 4".

Seeker_jeff · 03-24-2007, 04:12 PM

have any clue of how much its gonna cost ya to get it installed? im looking at almost the same except with a deaver leaf pack and a spacer up front for an extra 1.5" of lift. was told it would be 500 for install... is that asking a lot?

Advocate07 · 03-24-2007, 04:25 PM

Well my friend's dad owns Offroad Unlimited here in scottsdale so my install is going to be $300 with allignment.. I wouldn't pay $500 it's not that much work for a shop to install..

i<3mytitan · 03-24-2007, 06:32 PM

Quote:

Originally Posted by AgTitan06

Spindle = 4"
Radflos can be cranked 1-4" on 4x2.

= 8"

BTW, Greg sends this with 2" of lift, but you can adjust them down to 1" or up to 4".

I see, gotcha. I was under the assumption that the Radflos allowed for only 3" of lift...guess i'll go adjust mine for another inch then, LOL

AgTitan06 · 03-25-2007, 05:03 PM

Quote:

Originally Posted by i<3mytitan

I see, gotcha. I was under the assumption that the Radflos allowed for only 3" of lift...guess i'll go adjust mine for another inch then, LOL

These are the Radflo 2.0 front coilovers I'm talking about.