A little more front end lift with the Procomp 6" already installed?? - Page 2

54warrior · 03-28-2007, 10:12 AM

Quote:

Originally Posted by Voodoo

new a-arms with prg spacer will add 1 inch up front

I know cause i did it

But it's not the a-arm that gives the lift, it's the spacer. That's all I'm getting at.

The arm is needed so that it will clear the coil bucket. The PC/FT/Rancho lifts come with taller spindles, so that the original angle of the top/bottom a-arms remains the same. Once you add any type of spacer ontop of the coilover, you effectively change that relationship. The frame mounts stay the same, and the outer ball joint moint is "lowered". The arm itself is now at a steeper angle and doesn't clear the coil bucket. That is my understanding of why the new arms are req'd when adding the PRG spacer to a 6" lifted coilover.

Advocate07 · 03-28-2007, 03:45 PM

Quote:

Originally Posted by 54warrior

I understand that, just thought it was somewhat misleading though, that's all. Didn't want him getting his hopes up thinking he could get coilovers for $700

Good point.

Colorado_Titan · 03-30-2007, 08:37 PM

So I am really leaning towards the 2.5 Radflo's, but was hoping to see if anybody had some pics with a 6inch lift w/ the deavers and some coilovers raised a little. I know a lot of people have lifts with coilovers but don't know if they have the deavers. I just want to see what it looks like. So any pics?

DRTYAZN · 04-01-2007, 05:10 AM

Quote:

Originally Posted by Colorado_Titan

So I am really leaning towards the 2.5 Radflo's, but was hoping to see if anybody had some pics with a 6inch lift w/ the deavers and some coilovers raised a little. I know a lot of people have lifts with coilovers but don't know if they have the deavers. I just want to see what it looks like. So any pics?

I will second this motion... I'm sure there are pics out and about... (feelin' lazy and not wanting to search for them...lol) I was thinking about doing the same...