lifted higher...

mudfinder · 05-15-2007, 10:47 AM

i want to lift my truck higher. right now i have the DR coilovers. would I be able to get a higher lift if i was to get the CST spindle and TC UCA? how much higher would it go if i went that route? thanx

**Blackbeauty** · 05-15-2007, 11:09 AM

Did you get your DR's through PRG? Give Greg a call. He'll give you straight up answers to all your questions and will be able to tell you how much change you'll be out when it's over. Save yourself a whole lot of trouble and head-scratching. Good luck! Post some pics when you get 'er dun!

TruckinTitan · 05-15-2007, 11:33 AM

Quote:

Originally Posted by Blackbeauty

Did you get your DR's through PRG? Give Greg a call. He'll give you straight up answers to all your questions and will be able to tell you how much change you'll be out when it's over. Save yourself a whole lot of trouble and head-scratching. Good luck! Post some pics when you get 'er dun!

But don't post the pics in more than one thread or your arse is Blackbeauty's...

**Blackbeauty** · 05-15-2007, 11:40 AM

Quote:

Originally Posted by TruckinTitan

But don't post the pics in more than one thread or your arse is Blackbeauty's...

Put....ze....cyendle.....byeck.....

kartman · 05-15-2007, 11:47 AM

its a 4 spindle, so 4 inches.

TruckinTitan · 05-15-2007, 11:57 AM

Quote:

Originally Posted by Blackbeauty

Put....ze....cyendle.....byeck.....

Translation?

**Blackbeauty** · 05-15-2007, 12:25 PM

Young Frankenstein. When Terri Garr & Gene Wilder find the secret passageway behind the bookcase, and he gets stuck behind the closed bookcase....... Just a random thought that popped into my head at the time....

hooligan · 05-15-2007, 07:56 PM

uhhh yah! spindle + TC arms + 1" billet PRG custom spacer and you're looking at potentially another 5" of lift in front on top of the 0-3" you get from the DRs. pretty simple! don't forget to lift the rear or you'll look like a powerboat accelerating in water.