Bagging a 2008 Titan - Page 2

aldaman · 10-01-2007, 02:03 AM

Quote:

Originally Posted by bdmpastx

.....Also, are there any pictures out there of bagged Titans?
I have seen a blue one, grey one, and orange one. But that is just about it. I would like to see some more.

Here's one...

bdmpastx · 10-02-2007, 12:04 PM

Sweet Toyota ALDAMAN!

I have seen that truck too that you posted up.

Anyone have a clue what size rims Keelis Nissan had?

bdmpastx · 05-03-2008, 04:55 PM

You guys said to post up some pictures when it was done so here they are...
Before

After

[SC]Titan · 05-03-2008, 05:56 PM

looks really sweet man...would look even better if the rims were an inch or so bigger though

in about a year you're gonna want to body drop it

bdmpastx · 05-03-2008, 05:58 PM

I went with 24s and I think there is enough room for 26s i thought the 24s looked small....

boya544 · 05-03-2008, 06:04 PM

bdmpastx · 05-03-2008, 06:28 PM

Quote:

Originally Posted by [SC]Titan

in about a year you're gonna want to body drop it

The body is already touching the ground in the rear. The floor in the rear was raised to accomodate clearance for the gas tank as well as the frame being modified to lay lower. If you look at most crew cabs, they sit higher than mine due to the frame piece that extends down under the cew cab portion and the tranny cross member. I'll post more pics up sometime next weekend. The front is resticted by the oil pan. I would need to have that fabbed up or raise the motor up in the frame, but then the hood would need clearance. It's a never ending battle I tell ya. Everything so far is back to looking factory. It isn't the cut up mess you see in the pictures above.

[SC]Titan · 05-03-2008, 06:51 PM

Quote:

Originally Posted by bdmpastx

It's a never ending battle I tell ya.

oh, i know...i've bagged two trucks already...there is always something to do in the pursuit of more negative camber

bdmpastx · 05-06-2008, 06:10 AM

Here is a better pic someone else took.

kttnmthking · 05-06-2008, 02:52 PM

Quote:

Originally Posted by bdmpastx

The front is resticted by the oil pan.

go with a dry sump oil pan. that way youd gain the clearance and not have to raise the engine.

BTW, your truck is sick man

tre5 · 05-06-2008, 07:55 PM

I like your truck. Nice, clean, and low. Any pictures of inside the bed?

**BULLTITAN** · 05-06-2008, 08:09 PM

Very nice indeed. I would definately like to see inside the bed if possible and maybe under the hood. Man I envy you guys with deep pockets.

bdmpastx · 05-07-2008, 05:44 AM

When I get it back from the shop, I'll post some more pics of it. Including the bed. It is completly covered up and bedlinered.

Tightan07 · 05-07-2008, 01:02 PM

Your truck looks really nice. If I had to bag mine, I would have done the same exact thing, and nice rim choice too.

rtc1184 · 05-07-2008, 01:52 PM

bdmpastx, did you have ekstensive do it or bnc? i used to live in pasadena and know all the guys at bnc before the moved over to spencer. when they used to be on shaver. i went to high school with the shop foreman, chad. i dont believe he is there anymore. but the truck looks sick, wish i could have to titans, 1 lowered and and 1 lifted