pro comp 6in lift

[fatsplat10]

can any tell me why my titan makes these wierd klanking noises when ever i make a thigh turn. it seem that if the cam bolts may be shifting but im not sure

i just installed a pro comp 6in lift about 3 months ago and ever since its been doing this

i just checked to make sure everything was torqued to spec because i did some offroading the other day

any ideas would help thanks

[54warrior]

Chances are that it's the steering stop on the ProComp spindle rubbing on the lower control arm.

Good Explanation here:
http://www.titantalk.com/forums/554041-post10.html

Good Picture of what to grind here:
http://www.titantalk.com/forums/atta...g?d=1141400875

Note that you should NOT crank the wheel to the 'full lock' position and keep it there, even for tight turns.

[fatsplat10]

thanks man thanks for the info

the steer stop be ground flat right

once agian thanks and ill will see what happeneds

[yamatitan]

grind about 1/4" you dont want to go completly flat it will reek havoc on your steering rack.

[fatsplat10]

thanks will do

[devilrunner665]

yamatitan..your truck looks badazz

[yamatitan]

Originally Posted by devilrunner665

yamatitan..your truck looks badazz

Thanks man

[helix139]

I've got the same problem and after grinding the stop down it still creaks. Does it when I back out of the driveway or turn while applying the brakes. No one can help me where I live. Somewhere I read that Nissan has a floating lower control arm where the sound is coming from...any ideas!

[GoFast33]

Check your lower control arm bolts. After I had mine cranked with an impact, it has been quiet.

[dut]

Mines been doing the same. When I pull it out of my garage it makes a loud CLANK noise when turned all the way - this is going about 1-2 mph. I swear I've heard the same thing on older trucks. I have the 4" CST lift spindle if that makes a difference?

[HLBLY DLX]

I have a fabtech 6inch lift and mine does the same. At a hard turn there is a "cranking" noise that comes from behind the wheel. Im not all that savy when it comes to vehicle technical ish...I was about to start my own thread asking about this.

is it a bad tire/wheel combo?

I have the 35x12.5 Procomp ATs and 17inch DC1s....

[mikegh25]

i have the same deal here too...also if u have to go on a curb for any reason to turn .. makes a clanky noise i have taken it to 4 wheels parts where i had it put on...been there 3 times and they still have not fixed it.....

[bigjimbo]

I wonder if its the sway bar?