I need help! BAD!

blackfire · 02-20-2008, 04:58 PM

I'm installing the NCD spacers in place of some junk spacers the previous owner put on. As well as replacing the stock shock with some bilsteins. When i put everything together the spacers doesnt look like it's sitting right on the spring. I don't know what the orginal "clocking" of the spring seat was cause it wasn't there. I had to order them. Is it supossed to look like it's a little off; in that the spacer looks angled in relation to the spring?
Sorry no pics, at dad's house.

**Carbeaux** · 02-20-2008, 05:07 PM

I don't recall mine looking that way, but I could very well be misremembering. It was about a year and a half ago that I had mine pulled out to do the spacers. I don't think so though because my instructions didn't include the little tidbit about having to rotate the shocks 180 degrees to reinstall them. I think I'd have noticed that angle that you mention.

**Kronos1965** · 02-20-2008, 05:37 PM

It shouldn't be angled-at least not when I reset my springs, they all align.

Are your springs seated properly?

blackfire · 02-21-2008, 07:48 AM

I got it all put back together now so we'll see what happens once i get it on the road. At least I got some new bilsteins on it.