Prg Heavy Duty Shackle Install W/ Pics - Page 3

Juday · 04-10-2008, 05:17 AM

So how much more difficult is the install for those of us with the bedside toolbox? I'm thinking about getting some of these (not for the fact that I offroad), but rather reassurance that the stock shackle doesn't go through my bed for some odd reason. I think the price of the shackles is much cheaper than the price to fix a bed...

TYTAIN · 04-10-2008, 09:48 AM

Quote:

Originally Posted by Juday

So how much more difficult is the install for those of us with the bedside toolbox? I'm thinking about getting some of these (not for the fact that I offroad), but rather reassurance that the stock shackle doesn't go through my bed for some odd reason. I think the price of the shackles is much cheaper than the price to fix a bed...

Go ahead Juday...Call PRG with credit card in hand, I got mine on the way!

**Schrute** · 04-10-2008, 09:54 AM

Quote:

Originally Posted by Juday

So how much more difficult is the install for those of us with the bedside toolbox? I'm thinking about getting some of these (not for the fact that I offroad), but rather reassurance that the stock shackle doesn't go through my bed for some odd reason. I think the price of the shackles is much cheaper than the price to fix a bed...

IMO the toolbox is a PITA. If I need to touch that bolt again I'm drilling a socket sized hole in the toolbox then covering it with duct tape when I'm done. I need to go back and mess with it some more because the box is out of alignment now, I wish I would have just drilled the hole from the beginning as some others here have done.

But definitely get the shackles! They are beefy.

Juday · 04-10-2008, 10:03 AM

Quote:

Originally Posted by TYTAIN

Go ahead Juday...Call PRG with credit card in hand, I got mine on the way!

Ha, you know me too well. I'm going to order them next month (when I take my C/O's off and get them back to him). Figured I might as well...

Anyways, you're saying drill a hole in the side of the toolbox? Won't water and debris make its way in there?

**Schrute** · 04-10-2008, 10:14 AM

Quote:

Originally Posted by Juday

Anyways, you're saying drill a hole in the side of the toolbox? Won't water and debris make its way in there?

Just a little hole on the inner wall, you could get a socket on that bolt with a couple of extensions by just opening the toolbox door. Then duct tape when done!

Or remove the box, maybe it won't fight you as much as it did me.

firulice · 04-10-2008, 10:23 AM

Quote:

Originally Posted by Schrute

Just a little hole on the inner wall, you could get a socket on that bolt with a couple of extensions by just opening the toolbox door. Then duct tape when done!

Or remove the box, maybe it won't fight you as much as it did me.

+1 tool box removal is a pain in the a$$

ptgarcia · 04-10-2008, 11:32 AM

While duct tape may work, you could do something a little nicer and sturdier and put a little block-off plate or something over the hole.

Titan1080 · 05-09-2008, 10:59 AM

Quote:

Originally Posted by BECHLYF

(don't go thinking its a good idea to install that bolt from the outside toward the the frame because you think its easier, the pointy end will hit the frame and you will have to take it off and reinstall them both again)

DARNIT!!!!!! I figured I was smarter than Nissan and did precisely that...they aren't hitting the frame now, but I went back out and looked at it last night and I can see that it would hit the frame if I bottomed out the suspension.

Will have to fix that before I go wheeling next....by the way, these shackles are awesome!

Dirt125 · 05-09-2008, 10:10 PM

Thanks for the pic's Bech! I picked up a set last week, these pic's should help alot with the install this weekend

dogstar · 05-10-2008, 07:32 AM

OK so here comes dogstar with his questions. While looking over your pictures (nice touch) I started to wonder about the strength of the shackle mount that is attached to the frame. It doesn't look all that beefy. So now that you have replaced the shackle is this now the weak spot in the equation?

**TitanBlue** · 05-10-2008, 07:42 AM

So far, not a problem. It is the same strength as the frame et al. The main problem with the OEM Shackles, was that it could peel apart, not break the steel. Construction of the remaining parts is pretty industry standard stuff, so I wouldn't worry about that. I had same thoughts, and this is the conclusion I've come to. Just my opinion.

Prg Heavy Duty Shackle Install W/ Pics - being discussed at Nissan Titan Forums in the Titan Suspension section.