SAW's on the way - Page 5

**Schrute** · 04-29-2008, 10:37 PM

Quote:

Originally Posted by Hawaiianbasshead

sweet!

got me a 3" bodylift got piggybacks sitting outside for the back, and hope to order fronts with UCAs soon and a deaver and shackle so I can have it similar to your truck

, w/3" bodylift as well... should be able to clear my 36x13.5x17 with an +18 offset by looking at your truck. my 36"s are bald anyway so measure 35"

thanks for the wheel/tire specs. sick truck!

No problem on the specs. Post some pics when you get your suspension goodies installed!

Hawaiianbasshead · 04-29-2008, 10:49 PM

Quote:

Originally Posted by Schrute

No problem on the specs. Post some pics when you get your suspension goodies installed!

I've been here for 4 years

so it may still be a while

had the truck since 05.... at least I got my rear piggybacks sitting outside ready to install

CHUD · 04-29-2008, 10:56 PM

Quote:

Originally Posted by Schrute

Is this true? Can you run the bracket lift SAW's without a bracket lift? This is the first I've heard of this... Doesn't seem possible, but if true I wish I would have known about this sooner!!! Need to call Greg.

No, I think DRTYAZN is wrong if that's what he meant. You can't use the SAWs for bracket lifts unless you install the bracket lift components, or you opt for a mid-travel or long travel setup. I believe they're just too long. The longest SAW you could use for your application is the one you have (same as mine)... extended travel SAW.

By the way, nice job on your ride!

**Schrute** · 04-30-2008, 12:29 AM

Cool, thanks Chud!

**t22a80** · 04-30-2008, 05:40 AM

Quote:

Originally Posted by Schrute

Is this true? Can you run the bracket lift SAW's without a bracket lift? This is the first I've heard of this... Doesn't seem possible, but if true I wish I would have known about this sooner!!! Need to call Greg.

I was hoping the same thing but Greg said its not possible. They are just too long! That was my hold up, I wanted the SAW's but I also didnt want to spend the money because I knew I'd want a lift eventually too...

**Blackbeauty** · 04-30-2008, 05:53 AM

Just do it, you slacker!

Do you see how many "used SAW's" threads are on here? And how many don't sell? NONE! Get off the pot, SLACKER!!!

SAW's on the way - being discussed at Nissan Titan Forums in the Titan Suspension section.