4x4 Leveling kit

[Pete6923]

I just purchased a titan 4x4. And was just thinking about doing a leveling kit . Has anyone used a 2.5 spacer? I want the front to be a little taller. Does anyone have pics of thier leveled titans ? Thank you for any advise you can give.

[Blackbeauty]

Word on the street has it that you'll be wanting the 2" leveling kit..... not the 2.5" kit, with a 4x4. The 2.5" stands a 90%-100% chance of causing you to hit the coilbuckets with the UCA on full droop, or when you go over decent bumps. The 2.5" kit is for the 4x2 trucks.

Here's my truck way back when... in the good old days... with the PRG 2" leveling kit:






Oh, and here's where you can go to get it. http://www.prgproducts.com/shop/prod..._leveling_kit/

One of the easier and most satisfying mods you can do!

[07cajuntitan]

If you want the front higher than the rear, go with the 2" level in the front like Blackbeauty said, and get the PRG rear shackles which can lower the rear and give you the look you are after. Just my 2 cents.

[chieflikalotapus]

heres mine with a 2.5 inch spacer from top gunz. some say 4wd it will be a 2 inch spacer but top gunz says thiers is 2.5 for 4wd. which is what i have. i paid about $89 to my door.

[Pete6923]

Thanks guys . I appreciate all the help.