05-10-2008, 07:49 PM
|
#2
|
|
Registered User
Join Date: Oct 2006
Location: San Bernardino, CA
Posts: 214
|
Re: Rough Country Leveling Kit???
|
Short story = Bad. 3 inches is too high for a leveling kit/spacer... control arm will hit the coil bucket. I know PRG makes kits for 2WD and 4WD Titans (different thicknesses) as that their stock heights are different. His kits won't cause problems. You can get up to 2 inches with a spacer. If you want to go higher and you're 2WD you could get the CST spindles (4 inches front). If you want to go plush add some aftermarket coilovers. If you're 4WD, you could get Greg's Extended Travel Package (what I have). Aftermarket SAW coilovers, UCA's, Deavers, shackles, et cetera. It gives you about 3 inches of lift and the ride is a hundred times better than stock.
|
|
|
|
|