 |
 |
|
|||||||
Titan Suspension 
Technical discussion about the suspension components. |
 |
|
|
LinkBack | Thread Tools | Rate Thread | Display Modes |
06-02-2008, 10:22 PM
|
#1 (permalink) |
|
Registered User
 iTrader: (0)
Join Date: Feb 2008
Location: Las Vegas
Posts: 62
  Thanks: 0
Thanked 0 Times in 0 Posts
|
FYI : Camburg Extreme Performance Race Kit info
i asked them what the kit includes and what the travel would be.
this was the response ! 18-20"of travel, depending on what you eliminate under the hood, and how much you want to notch your frame. The notching is only necessary for the tie rod and upper arm, it can contact the frame at full droop and bump. The kit comes with upper/lower arms, spindles, 2" hollow snouts, hubs w/ all timken bearings and seals, 5/8 race studs, tie rods, every bearing/heim, and all related hardware. You will have to purchase shocks and take care of all shock mounting. As it is a "race" kit, we let you the fabricator decide what to do with that. It just gets too tricky when everyone wants something different shock wise. The kit comes raw, and definitely not a bolt on, or something the average person could tackle. There is a fair amount of fabrication involved with this kit....
__________________
  SOME PEOPLE ARE LIKE SLINKIES, THEY ARE REALLY NOT GOOD FOR ANYTHING... BUT THEY STILL BRING A SMILE TO YOUR FACE WHEN YOU PUSH THEM DOWN A FLIGHT OF STAIRS. |
|
|
|
06-02-2008, 10:33 PM
|
#2 (permalink) |
|
Registered User
iTrader: (1)
Join Date: Jan 2006
Location: SoCal
Posts: 3,229
Thanks: 9
Thanked 4 Times in 4 Posts
|
Re: FYI : Camburg Extreme Performance Race Kit info
yup, i've viewed the complete kit on the showroom floor of kartek's ( www.kartek.com ) quite an impressive kit and everything is stout! however they aren't joking when they say depends on what you eliminate and what you notch out. a lot of plasma cutting and fabricating involved just to get the kit put on.
__________________
 
|
|
|
|
|
06-03-2008, 08:58 AM
|
#4 (permalink) |
|
Registered User
iTrader: (0)
Join Date: Feb 2008
Location: Las Vegas
Posts: 62
Thanks: 0
Thanked 0 Times in 0 Posts
|
Re: FYI : Camburg Extreme Performance Race Kit info
says $5500 on the site ...
any way you can get some pix of the truck at kartek ? would like to see the mods that have been done for the kit to work properly. i dont mind cutting up the truck for something that would give me 20" of travel in the front and work properly.
__________________
SOME PEOPLE ARE LIKE SLINKIES, THEY ARE REALLY NOT GOOD FOR ANYTHING... BUT THEY STILL BRING A SMILE TO YOUR FACE WHEN YOU PUSH THEM DOWN A FLIGHT OF STAIRS. |
|
|
|
|
06-03-2008, 07:48 PM
|
#7 (permalink) |
|
Registered User
iTrader: (0)
Join Date: Feb 2008
Location: Las Vegas
Posts: 62
Thanks: 0
Thanked 0 Times in 0 Posts
|
Re: FYI : Camburg Extreme Performance Race Kit info
damn that sucks ..... i wanna see one installed and what needs to be done to the truck to run it
__________________
SOME PEOPLE ARE LIKE SLINKIES, THEY ARE REALLY NOT GOOD FOR ANYTHING... BUT THEY STILL BRING A SMILE TO YOUR FACE WHEN YOU PUSH THEM DOWN A FLIGHT OF STAIRS. |
|
|
|
|
06-03-2008, 11:58 PM
|
#8 (permalink) | |
|
Registered User
iTrader: (1)
Join Date: Jan 2006
Location: SoCal
Posts: 3,229
Thanks: 9
Thanked 4 Times in 4 Posts
|
Re: FYI : Camburg Extreme Performance Race Kit info
Quote:
__________________
|
|
|
|
|
|
06-04-2008, 05:00 PM
|
#9 (permalink) |
|
Registered User
iTrader: (1)
Join Date: Dec 2007
Location: Corona, CA
Posts: 182
Thanks: 0
Thanked 0 Times in 0 Posts
|
Re: FYI : Camburg Extreme Performance Race Kit info
bad *** ive been waiting for them to come out with the kit for a while
__________________
2005 offroad package jba cat back with a home made turn down airraid tbs aem bf cai (wrapped for a true cai) active tuning grounding kit austins locker mod clean secondary cats ( epa) royal purple everything the beast is in heaven superchips tuning  eating more and more cars n trucks day by day
|
|
|
|
|
06-05-2008, 04:34 AM
|
#10 (permalink) |
|
Registered User
iTrader: (1)
Join Date: Feb 2008
Location: Whittier, Ca.
Posts: 60
Thanks: 3
Thanked 0 Times in 0 Posts
|
Re: FYI : Camburg Extreme Performance Race Kit info
__________________
05 4X2 SE CC W/BIG TOW MODS: FLOWMASTER CATBACK EXHAUST/INJEN INTAKE/2* TIMING ADVANCE |
|
|
|
|
06-05-2008, 11:22 AM
|
#11 (permalink) |
|
Registered User
iTrader: (0)
Join Date: Feb 2008
Location: Las Vegas
Posts: 62
Thanks: 0
Thanked 0 Times in 0 Posts
|
Re: FYI : Camburg Extreme Performance Race Kit info
NICE !!!
thanx for the think .... a lil concerned with the 5 lug hubs but i cant wait to see that big dawg installed
__________________
SOME PEOPLE ARE LIKE SLINKIES, THEY ARE REALLY NOT GOOD FOR ANYTHING... BUT THEY STILL BRING A SMILE TO YOUR FACE WHEN YOU PUSH THEM DOWN A FLIGHT OF STAIRS. |
|
|
|
|
«
Previous Thread
|
Next Thread
»
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | |
| Display Modes | Rate This Thread |
Linear Mode
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Magnaflow Performance Race Series Muffler | SPEEDLIMITER | Buy/Sell | 8 | 05-01-2008 05:38 AM |
| Need info on performance mods for 07. | parks5855 | Titan Performance Modifications | 2 | 07-08-2007 08:43 PM |
| Custom Performance/Race Headers!!!??? | Titan R | Titan Performance Modifications | 2 | 06-25-2007 07:19 PM |
| We need some info on Performance stuff! | LS1POWERED | Titan Performance Modifications | 13 | 02-16-2004 10:32 AM |
All times are GMT -7. The time now is 01:38 AM.
SEO by vBSEO 3.2.0