 |
 |
|
|||||||
Titan Suspension 
Technical discussion about the suspension components. |
 |
|
|
LinkBack | Thread Tools | Rate Thread | Display Modes |
06-17-2008, 12:06 PM
|
#1 (permalink) |
|
Registered User
iTrader: (0)
Join Date: Feb 2008
Posts: 14
Thanks: 0
Thanked 0 Times in 0 Posts
|
pro comp 6in lift
can any tell me why my titan makes these wierd klanking noises when ever i make a thigh turn. it seem that if the cam bolts may be shifting but im not sure
i just installed a pro comp 6in lift about 3 months ago and ever since its been doing this i just checked to make sure everything was torqued to spec because i did some offroading the other day any ideas would help thanks  |
|
|
|
06-17-2008, 12:38 PM
|
#2 (permalink) |
|
Registered User
 iTrader: (0)
Join Date: Jan 2005
Location: Dayton, PA/Millersville, PA
Posts: 3,358
Thanks: 21
Thanked 9 Times in 7 Posts
|
Re: pro comp 6in lift
Chances are that it's the steering stop on the ProComp spindle rubbing on the lower control arm.
Good Explanation here: http://www.titantalk.com/forums/554041-post10.html Good Picture of what to grind here: http://www.titantalk.com/forums/atta...g?d=1141400875 Note that you should NOT crank the wheel to the 'full lock' position and keep it there, even for tight turns.
__________________
 The strongest reason for the people to retain the right to keep and bear arms is, as a last resort, to protect themselves against tyranny in government. - Thomas Jefferson 2005 Nissan Titan CC SE 4x4 6" Stage 1 Procomp Lift, SAW Coilovers, 35x12.50-17 Cooper Discoverer S/T's , 17x9" Xtreme Alloy 1079's, Lund Bug Shield, Autoventshade Vent Visors, Extang Tonneau Cover, Husky Liners, Custom Skid Plates, Bilstein 5125 Rear Shocks, Total Chaos Shackles, Splash Mod, Axle Vent Mod, N-Fab Steps, Tailgate Cargo Light Mod, Hella 500 Series Driving Lights, 3 of 'Em |
|
|
|
06-23-2008, 08:12 PM
|
#4 (permalink) |
|
Registered User
iTrader: (0)
Join Date: Sep 2007
Location: Baton Rouge, Louisiana
Posts: 891
Thanks: 0
Thanked 2 Times in 2 Posts
|
Re: pro comp 6in lift
grind about 1/4" you dont want to go completly flat it will reek havoc on your steering rack.
__________________
2006 CC LE, BT, OFFROAD with nav and sunroof Procomp 6" ($1300.00) 18" Procomp 8179 wheels ($700.00) 35x12.5x18 Toyo MT's $1100.00) PRG Offroad Traction Bars ($489.00) Banks Monster Exhaust ($500.00) 2* Timing Advance ($0) Huskyliner floorliners ($140.00) Volant Powercore ($320.00) Tech12volt box with 2xkicker 12 and kicker amp ($340.00) SAW coilovers ($1000.00) Bushwacker Pocket style flares ($600.00) Go Dominator type II steps ($320.00) Warn 12k powerplant with milemarker winch mount ($1865.00) Money wasted so far=$8674.00 
|
|
|
|
|
06-28-2008, 01:48 PM
|
#6 (permalink) |
|
Registered User
iTrader: (0)
Join Date: May 2008
Posts: 25
Thanks: 0
Thanked 0 Times in 0 Posts
|
Re: pro comp 6in lift
yamatitan..your truck looks badazz
__________________
2007 Frontier XE, 5spd., Titan Swap, Custom Valved and Sprung Radflo's by Greg, SS Brake Lines, 33" Dune Grapplers, 17" Titan Offorad wheels, 1.5" convert adapters, Black Front Grille, Red Nissan Emblem, Custom Ram Air Intake, Flowmaster Exhaust, Rancho 9000XL's in rear 
|
|
|
|
|
06-28-2008, 06:02 PM
|
#7 (permalink) | |
|
Registered User
iTrader: (0)
Join Date: Sep 2007
Location: Baton Rouge, Louisiana
Posts: 891
Thanks: 0
Thanked 2 Times in 2 Posts
|
Re: pro comp 6in lift
Quote:
__________________
2006 CC LE, BT, OFFROAD with nav and sunroof Procomp 6" ($1300.00) 18" Procomp 8179 wheels ($700.00) 35x12.5x18 Toyo MT's $1100.00) PRG Offroad Traction Bars ($489.00) Banks Monster Exhaust ($500.00) 2* Timing Advance ($0) Huskyliner floorliners ($140.00) Volant Powercore ($320.00) Tech12volt box with 2xkicker 12 and kicker amp ($340.00) SAW coilovers ($1000.00) Bushwacker Pocket style flares ($600.00) Go Dominator type II steps ($320.00) Warn 12k powerplant with milemarker winch mount ($1865.00) Money wasted so far=$8674.00
|
|
|
|
|
|
07-01-2008, 08:06 AM
|
#8 (permalink) |
|
Registered User
iTrader: (0)
Join Date: Dec 2007
Location: tampa, fl
Posts: 6
Thanks: 0
Thanked 0 Times in 0 Posts
|
Re: pro comp 6in lift
I've got the same problem and after grinding the stop down it still creaks. Does it when I back out of the driveway or turn while applying the brakes. No one can help me where I live. Somewhere I read that Nissan has a floating lower control arm where the sound is coming from...any ideas!
|
|
|
|
|
07-01-2008, 08:37 AM
|
#9 (permalink) |
|
Registered User
iTrader: (2)
Join Date: Jun 2004
Location: Westlake Village, CA
Posts: 272
Thanks: 0
Thanked 0 Times in 0 Posts
|
Re: pro comp 6in lift
Check your lower control arm bolts. After I had mine cranked with an impact, it has been quiet.
__________________
2008 Pro-4X Crew Cab Long Bed Pro Comp 6", SAW front (0.75" preload), SAW rear, 18x9 XD Rockstar, 35x12.5x18 BFG KM2 |
|
|
|
|
07-01-2008, 09:55 AM
|
#10 (permalink) |
|
Registered User
iTrader: (1)
Join Date: Dec 2007
Location: San Diego
Posts: 519
 Thanks: 0
Thanked 0 Times in 0 Posts
|
Re: pro comp 6in lift
Mines been doing the same. When I pull it out of my garage it makes a loud CLANK noise when turned all the way - this is going about 1-2 mph. I swear I've heard the same thing on older trucks. I have the 4" CST lift spindle if that makes a difference?
__________________
Cars: Titan Crew Cab: CST Spindles + SAW coilovers + SAW rear shocks (6.5" lift) / G35 Coupe / Civic EX with Nav | IS300 (sold) | Tacoma Double Cab (sold) | REAL EK9/Civic Type R(sold) | Civic HB [ek/ej6] (sold) | E46 M3 (sold) | S2000 (sold) | IS300 (sold) | Bagged Tacoma (sold) | Integra GSR (sold) | Civic HB [eg/11.9@115mph] (sold) | Celica [beater] (sold) | Civic HB [eg] (totalled) | CRX [b16 powered] (sold) | '58 bug (sold) Bikes: '06 YFZ450 | CBR1000 (stolen) | GSXR 1000 (totalled) | GSXR 750 (stolen) | YSR50 (sold) Houses: Almost, FINALLY.  |
|
|
|
|
07-01-2008, 12:14 PM
|
#11 (permalink) |
|
Registered User
iTrader: (1)
Join Date: Sep 2007
Location: Northern VA
Posts: 21
Thanks: 0
Thanked 0 Times in 0 Posts
|
Re: pro comp 6in lift
I have a fabtech 6inch lift and mine does the same. At a hard turn there is a "cranking" noise that comes from behind the wheel. Im not all that savy when it comes to vehicle technical ish...I was about to start my own thread asking about this.
is it a bad tire/wheel combo? I have the 35x12.5 Procomp ATs and 17inch DC1s.... |
|
|
|
|
07-04-2008, 10:41 PM
|
#12 (permalink) |
|
Registered User
iTrader: (0)
Join Date: Mar 2008
Location: san diego
Posts: 122
Thanks: 0
Thanked 0 Times in 0 Posts
|
Re: pro comp 6in lift
i have the same deal here too...also if u have to go on a curb for any reason to turn .. makes a clanky noise i have taken it to 4 wheels parts where i had it put on...been there 3 times and they still have not fixed it.....
|
|
|
|
|
«
Previous Thread
|
Next Thread
»
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | |
| Display Modes | Rate This Thread |
Linear Mode
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| What body lift could I use with a pro comp 6" lift? | texas t | Titan Suspension | 9 | 04-09-2008 03:49 PM |
| Pro Comp Lift | johnwoo | Titan Suspension | 7 | 07-31-2007 04:38 AM |
| pro comp lift | nytitan1 | Titan Suspension | 5 | 06-18-2006 12:27 PM |
| pro comp lift | ahhhrockyahhh | Titan Suspension | 3 | 09-29-2005 02:17 PM |
| pro comp lift | mytitan | Titan Suspension | 4 | 03-13-2005 04:17 PM |
All times are GMT -7. The time now is 08:04 AM.
SEO by vBSEO 3.2.0