Sorry for the delay in posting these I needed help figureing out how to post? With that said check it out , I want to thank all the members who helped me from removing rusty bolts to break line trouble still working out the kinks a little squeeling going on now? Not sure what that could be I read a thread about dust guards from 54 Warrior I will remove my front wheels soon and check that out , but all in all I like it looks alot better and rides really well. Thanks again for being there guy's!
Man night and day!! Looks great! What size Kooks are you running?
__________________
RIP Bobby. Godspeed WAR EAGLE!
Mods: PRG stuff, HID's, Some Audio stuff that makes my mirrors useless, 35" Toyo M/T's, some big bright lights on a one off bar, some paint on an engine cover, some window tint, Some 09', 08' parts, some fancy blue ground wires that dont do nuthin, and some other crap.
Happiness Is Beating Bama in Anything, Anytime, Anywhere
The 2nd Amendment... Washington didn't use his right to free speech to defeat the British, He shot them.
looks good i still think the rc 6 is higher than the other 6 inch kits
I was thinkin the same thing. It makes the 35's look smaller....
Is it straight Rough Country or did you go with a RC/PRG setup? (coilovers, Deaver pack..etc)
__________________
RIP Bobby. Godspeed WAR EAGLE!
Mods: PRG stuff, HID's, Some Audio stuff that makes my mirrors useless, 35" Toyo M/T's, some big bright lights on a one off bar, some paint on an engine cover, some window tint, Some 09', 08' parts, some fancy blue ground wires that dont do nuthin, and some other crap.
Happiness Is Beating Bama in Anything, Anytime, Anywhere
The 2nd Amendment... Washington didn't use his right to free speech to defeat the British, He shot them.
Nope nothing special just RC kit 1200.00 delivered to my house total cost of lift including tires was 2200.00 bought kooks on line , no PRG stuff yet anyway? With this economy right now it is what it is!!!!!!
__________________
RIP Bobby. Godspeed WAR EAGLE!
Mods: PRG stuff, HID's, Some Audio stuff that makes my mirrors useless, 35" Toyo M/T's, some big bright lights on a one off bar, some paint on an engine cover, some window tint, Some 09', 08' parts, some fancy blue ground wires that dont do nuthin, and some other crap.
Happiness Is Beating Bama in Anything, Anytime, Anywhere
The 2nd Amendment... Washington didn't use his right to free speech to defeat the British, He shot them.
Sorry for the delay in posting these I needed help figureing out how to post? With that said check it out , I want to thank all the members who helped me from removing rusty bolts to break line trouble still working out the kinks a little squeeling going on now? Not sure what that could be I read a thread about dust guards from 54 Warrior I will remove my front wheels soon and check that out , but all in all I like it looks alot better and rides really well. Thanks again for being there guy's!
Hey Yetti,
I just received my RCX in the mail and I'm sitting here going through the parts and install directions and I have a question for you. I noticed you said you are having issues with your brake lines being to short. Did your kit come with the front brake line relocation bracket? I am assuming you are talking about the front brakes? If you don't mind what issues exactly did you run into. I think you mentioned them before on another post but I can't find it. Thanks and your truck looks awesome. Hope to be there soon!
__________________
________________________
________________________________
2008 TITAN SE 4X4 Long Bed King Cab
6" Rough Country Lift
SE Max Utility Package
SE Popular Equipment Package
Big Tow Package
Chrome Steps Rails
The kit didn't come with front break lines the stock ones were way too short. The kit came with rear relocation brakets only. See below for the issues I had,
1. I didn't spray any of my old bolts with PB Blaster until I was into the install , I would spray all the bolts down a day or two before even starting.
2. Loosen all your bolts before taking anything apart because too many parts move around not allowing any decent leverage to break the bolts free.
3. Pressing the hub off the arm was a B*&^* I had to take them to a shop and have them press them off.
4. Got everything done and saw that the break lines were too short , had no breaks, had to order prg lines . So the truck was down for a few days!
All in all it was a few unexpected surprises but I would do it all over again , I have had mine on now for a few months NO ISSUES sometimes it squeeks but just spray it with some spray oil and good to go. And to be honest I cant praise this club's members enough the help and response time was incredible.Good luck!!!! and post pics when your done!!!!
The AutoGuide.com network consists of the largest network of enthusiast-owned enthusiast-operated automotive communities.
AutoGuide.com provides the latest car reviews, auto show coverage, new car prices, and automotive news. The AutoGuide network operates more than 100 automotive forums where our users consult peers for shopping information and advice, and share opinions as a community.