PRG Billet DS spacer help...

[aztitan1]

I just received my Drive Shaft spacer from PRG and thought I would install it today. I thought I could just remove the bolts and the Drive Line would slide off, but I guess I was wrong. How do I remove the Drive line to so I can install the spacer?

[Blackbeauty]

Here ya go...

Rear Propeller Shaft.pdf

[aztitan1]

Originally Posted by Blackbeauty

Here ya go...

Attachment 84875

Thanks for posting the link. I tried to remove the drive shaft, but that thing won't budge. I am going to take it to a shop and have them install it. It's too hot in phoenix to be messing with it right now...

[54warrior]

I'd smack it with a hammer, around the perimeter. Me thinks its' rusted together.

[scottsbro23]

Originally Posted by 54warrior

I'd smack it with a hammer, around the perimeter. Me thinks its' rusted together.

BINGO! thats all ya gotta do. We installed one of Gregs DS spacers a few months ago.. It's cake.

[aztitan1]

I'll try that. I was smacking it with a rubber mallet because I didn't want to damage it. Maybe I will cover it with something and smack it with a regular hammer.

[pipho]

yup just needs a good tap, if you hit on the u joint caps you should be fine, pretty much just dont hit the tube and you will be fine

[aztitan1]

Here are some pictures before and after the spacer was installed. As you can see it made a big difference. Thanks for everyone's input!

[EDDIE FONZARELI]

did you end up doin it yourself or did you take it to the shop ??

[MrStevie]

what's a driveshaft spacer for? do you need it when you lift the rear?

[adkl1]

If you put on the 6" lift it helps..

[aztitan1]

Originally Posted by EDDIE FONZARELI

did you end up doin it yourself or did you take it to the shop ??

I ended up taking it to a shop. I got tired of messing with it. I couldn't get it to budge. A local drive shaft shop charged me $50 to install it.