More sub ideas

Warp09 · 11-07-2009, 11:20 AM

I am pretty much done with performance modifications for now, so now it's time to go back to audio systems. I have an idea, where I can run either 3 or 4 FF 10" subs. I would've liked to have run W6s, but 3 of them won't wire down to the correct ohm load I need, 1 OHM. I am working with about ~1500W from my RF 1500-1 BD mono amp. I get 1500W @ 1 OHM.

I was looking at RE SEX's, W7s (maybe? I probably wouldn't have enough power for these, but JL's website says optimum is around 500RMS continuous play), and whatever else you guys recommend. Still need to draw up something for the box, so I will bug my brother with that later today and see how everything goes. Hopefully I can start doing this soon if money allows it.

Also, what's the max lift someone has got with the front of the lift, while the seats can still latch? 10.5" or 11"? Thanks.

Any ideas?

07 TITAN · 11-07-2009, 12:02 PM

I just used some 3/4th MDF blocks in place of the rubber pads and I have about 12.5in at the front but it dosn not latch. I have a box/amp rack in the works now for #1 10" FI SSD at 1000WRMS and that thing slams.

SD_Titan · 11-07-2009, 12:09 PM

any reason why your wanting 3 or 4 subs? is it for looks? i just made a ported box for 2 8" L5 subs and they hit pretty darn good

W7's wont fit unless you can raise the rear of the seat or have an angled front baffle along with a big seat lift

2 w6's would give you a 1ohm load, y not use just 2?

My Next Setup is going to be 2 8" DD subs ported, ill show ya pix and a vid when i get them in

Warp09 · 11-07-2009, 04:23 PM

Found the subs I was looking for, I will let you guys know how it turns out when everything is in. Thanks.