Help with LOC hookup

jc344 · 02-27-2006, 08:11 PM

Okay, I am upgrading the sound system in the truck and keeping the stock head unit. I bought a 4 channel LOC and I just ordered the 2 Nissan wiring harnesses (regular and reverse) for a clean install. I thought all was good until today when I pulled out the factory head unit to take a look. I see like 4 or 5 plugs going into the HU. Which ones are the ones i need to hook into the LOC to connect an amp?

Also, I will have 2 amps, a 2 channel and a 4 channel. Do I put a RCA splitter on the LOC and run two RCA's to the 4 channel and one to the 2 channel? Or do I just daisy chain the 2 channel from the output RCA of the 4 channel amp? Hope this makes sense to someone out there.

Thanks

bestatchess · 02-28-2006, 02:57 AM

Daisy chain the signal from the 4 channel to the 2 channel amp.

Attached photo shows the hookup for the harnesses & LOC.

jc344 · 02-28-2006, 01:44 PM

Thanks, bestatchess, exactly what I needed!

btw, what are the other 3 plugs for?

eakes · 02-28-2006, 02:11 PM

Quote:

Originally Posted by jc344

Thanks, bestatchess, exactly what I needed!

btw, what are the other 3 plugs for?

All five of the plugs are different sizes, so you can't plug them in wrong unless you break something.

The other three plugs are for: Satellite receiver, steering wheel controls, signals to/from front panel.