Best Subwoofer Set up!!!

[eduardomi]

Hi guys I have an issue choosing what is the best set up for me, I am a fan of SQ but on this truck I want to pull as much BASS as I can, of course once again the space is an issue. I really dont care the underseat storage, I can use all the space underneath the rear seat to put whatever will give me good pumps.

Anyone here have 12's ? if so what is the brand and how did you do it?
If 10's was your choice, how did you do it?

I wont go with the 8's, as I think they are not going to give me what I am looking for. Actually I was thinking... If I cant get the 12's down there I'll go with 3-10's or something. I like big magnets, actually I am fellow fan of W7's but I think I'll have to give up to my dream of putting W7's in the truck. What do you guys suggest. I am planning to buy the box from Tech12Volt.

Also I read something about raising the seat, how can that be done? o_O

Important Note: Crew Cab here

Alright, I'd really really appreciate all your input guys. I believe this is the best TITAN resource in the whole Internet.

Thanks!!!


Ed.

[Justintoxicated]

Depends on your budget!

Big magents really don't mean anything. You could go with a Fi-Q 10" in a ported box. It may be louder than 3 10" sealed if that is what your after. Or you could do 2 10" sealed just needs more power $$. Not sure on fitting 3 10's probably better off with 1 or 2. If you lift the seats you can go with a larger sub.

www.ficaraudio.com

2 TC1000's would probably be pretty cool too if you lift the seat and they are on sale right now.

note: I have not heard either of these subs in person.

BTW there really is no BEST setup.

[RFosgate]

I didn't think Fi made the Q in 10" Their 12" has a mounting depth of 6.5" that might be a bit tall. If you want something similar, maybe RE audio would have something you are looking for. Good clarity, Great output, and nice size.
for 10" their SR series only needs 5.25" or their SE need 6" but that might be to tall also.

http://www.reaudio.com

[Justintoxicated]

Originally Posted by RFosgate

I didn't think Fi made the Q in 10" Their 12" has a mounting depth of 6.5" that might be a bit tall. If you want something similar, maybe RE audio would have something you are looking for. Good clarity, Great output, and nice size.
for 10" their SR series only needs 5.25" or their SE need 6" but that might be to tall also.

http://www.reaudio.com

Click on the link for the Q they do list the 10" version. If not you can call them and they can make you one.

Q10


DUAL 1 | DUAL 2

Fs: 29.0 Hz | 26.2 Hz
Re: 0.70 Ohms/coil | 1.4 Ohms/coil
Qms: 4.80 | 5.10
Qes: .41 | .41
Qts: .38 | .38
Mms: 186g | 202g
Cms: 1.70mm/N | 1.70mm/N
Sd: 310cm^2 | 310cm^2
Vas: 22.3 l | 22.3 l
Spl: 82.9dB 1W/1m | 82.9dB 1W/1m
Bl: 10.4 N/A | 15.1 N/A
Xmax: 27mm
Rms: 1000W
Sealed box: .2-.6 cuft
Ported box: .5-1.2 cuft @ 28-33Hz
Sub OD: 11.000”
Cut ID: 9.250”
Mounting depth: 6.500”
Displacement: 0.12cuft


Product code: 01710


Price: $ 249.00

[tech12volt]

Originally Posted by Justintoxicated

Click on the link for the Q they do list the 10" version. If not you can call them and they can make you one.

Q10


DUAL 1 | DUAL 2

Fs: 29.0 Hz | 26.2 Hz
Re: 0.70 Ohms/coil | 1.4 Ohms/coil
Qms: 4.80 | 5.10
Qes: .41 | .41
Qts: .38 | .38
Mms: 186g | 202g
Cms: 1.70mm/N | 1.70mm/N
Sd: 310cm^2 | 310cm^2
Vas: 22.3 l | 22.3 l
Spl: 82.9dB 1W/1m | 82.9dB 1W/1m
Bl: 10.4 N/A | 15.1 N/A
Xmax: 27mm
Rms: 1000W
Sealed box: .2-.6 cuft
Ported box: .5-1.2 cuft @ 28-33Hz
Sub OD: 11.000”
Cut ID: 9.250”
Mounting depth: 6.500”
Displacement: 0.12cuft


Product code: 01710


Price: $ 249.00

max mounting depth is 6 inches.thats it without raising the seat or glassing the bottom.

[CDubya]

I've got 2 Memphis 12's in one of Tech12Volts enclosure in my crew cab and they will beat the f**kin doors of my truck. Just ask that lady next to me in traffic today about them 12's, with Spiderbaits "Black Betty" beatin the front semi-metallic disc brakes pad shims off her sh*t!!!! She was feelin it!!!...im ok, just got worked up. I'm good....

[P-Dizzle]

Have tech12volt build you a ported enclosure for a single RE Audio SX10 sub and wire it at 1Ohms running off a Sundown Audio SAZ-1500D amp.

[P-Dizzle]

or an FI BTL10, BL10.