325/60/18 w/ spindle lift

wakeboarder2186 · 01-22-2007, 08:08 PM

does anyone know if the nitto terra grappler 325/60/18 will fit on the stock se rims w/ the cst 4" spindle lift w/o rubbing? thanks in advance

AgTitan06 · 01-22-2007, 08:12 PM

im pretty sure that would fit.
CST 4" Spindle Lift

wakeboarder2186 · 01-22-2007, 08:21 PM

i think so too, just not sure cause of the spindles being straight rather than curved

USAFs13 · 01-22-2007, 10:27 PM

those are the exact tires im going to be getting, i just went to the shop today, and they told me that with a front leveler kit, that size will fit just fine without any other mods.

granted im taking their word on it but they assured me that with that combination that i wont get rub even when i go off roading

wakeboarder2186 · 01-23-2007, 08:37 AM

i was just mainly wondering about clearance with the spindles, i know they clear stock spindles no problem but im not sure about the cst ones.

i<3mytitan · 01-23-2007, 10:08 AM

as long as the rims fit stock, they should fit the CST spindles.

titanmann · 01-23-2007, 11:18 AM

just to chime in..

I have the same tire/rim setup - but with the 2" Radflo CO, no probs with rubbing..

325/60/18 Nitto Terra Grapplers on 18" SE Rim - 2" Radflo

wakeboarder2186 · 01-23-2007, 04:05 PM

k, my question was mainly because the cst spindles use a straight tube design unlike the cast stock spindles. the stock ones allow a little more clearance than the cst and i was just worried about the tire being too wide on because the stock rim already sits so close to everything.