mickey thompson rims

vadorsnake04 · 12-01-2007, 08:08 PM

I just wanted to make sure that these wheels will fit my 06 titan before i order them.

They are the Mickey Thompson Classic II's

Specs: 18x9, 6x5 1/2 lug pattern, 5. backspacing, 0 offset, and it says that they include hub centric ring for late model chevy/ GMC. Arent our wheel dimensions basically the same?

Thanks,
Blake

NorCal 4x4 · 12-01-2007, 08:38 PM

What tires are you planning to run on them?

They will stick out 1.5" more than the OEM LE and SE rims. I know of people having rubbing issues with a 9" wide rim with 4.5" backspacing in the following cases ... so you would be half an inch better than them:
1) 6" PC lift with 35x12.5 BFG MT KM
2) Level Kit with 295/70/17 Nitto Terra Grapplers.

Not sure if we are exactly the same as the GM hub.

vadorsnake04 · 12-02-2007, 06:53 AM

i was planning on running toyo m/t 33x12.5-18

vadorsnake04 · 12-02-2007, 06:54 AM

and i was going to run that prg mini lift, and do the pinch weld mod.

NorCal 4x4 · 12-02-2007, 01:22 PM

Quote:

Originally Posted by vadorsnake04

and i was going to run that prg mini lift, and do the pinch weld mod.

They should work then. You may need to mount them with lug-centric nuts to center the wheels if the hub isn't exactly the same. The wheel place should be able to tell you and make sure you have the correct lug nuts.

vadorsnake04 · 12-02-2007, 04:40 PM

alright, thanks a lot norcal

Chevy4740 · 12-02-2007, 05:17 PM

I have the 18x8 MB razor wheels with 5. backspacing 0 offset. I have the NCD 2.5 leveling kit. The tires are 325/60/18 nitto. I did the pinch weld mod. And I still rub sometimes.
Click on my sig pic to see the wheels I have.

vadorsnake04 · 12-02-2007, 05:22 PM

325/60-18 is the equivalent to like 33.4x12.6 or so right...?

Chevy4740 · 12-02-2007, 05:32 PM

I think they are around 33/12.5

You can go to tirerack.com they should have a chart to cross the metric to standard.

NorCal 4x4 · 12-03-2007, 12:32 PM

Quote:

Originally Posted by titan4740

I have the 18x8 MB razor wheels with 5. backspacing 0 offset. I have the NCD 2.5 leveling kit. The tires are 325/60/18 nitto. I did the pinch weld mod. And I still rub sometimes.
Click on my sig pic to see the wheels I have.

An 8" wide rim with 0mm of offset, has 4.5" backspacing, (sticks out 1" more than the stock 8" wide rims). If it's a 9" wide rim, with 0 offset, then it has 5" of backspacing, (this one would stick out 1.5" more than the stock 8" rims).

The 325/60/18 Nitto TG are 33x12.8 on a 9.5" wide rim, about 12.6" wide on a 9" width, and probably about 12.2 on an 8" width rim.