XE center console

[InNae]

Hey any chance you can get the part they are talking about in this post

http://www.titantalk.com/showthread.php?t=11470

The Factory Nissan Part number is 68260-7S200.

I think that there would be interest in this.

thanks

[Titanparts1]

Originally Posted by InNae

Hey any chance you can get the part they are talking about in this post

http://www.titantalk.com/showthread.php?t=11470

The Factory Nissan Part number is 68260-7S200.

I think that there would be interest in this.

thanks

Yes, your cost would be $43.89 for that part number!!

[lizardking]

Originally Posted by Titanparts1

Yes, your cost would be $43.89 for that part number!!

Is that the right part number? Nissan gave me 68260-7S000

[CaliforniaTitan]

Jamie,

Do you have a way to check visually the two part numbers? I think one of them has the dimples for rear controls for a CC...I would be looking for a KC variety without the dimples.

Chris

[Titanparts1]

Originally Posted by CaliforniaTitan

Jamie,

Do you have a way to check visually the two part numbers? I think one of them has the dimples for rear controls for a CC...I would be looking for a KC variety without the dimples.

Chris

There is actually 4 different options, and all fit both CC and KC.
1. For XE+SE P#68260-7S000
2. For XE+SE with AM/FM in-dash 6-disc cd changer. P#68260-7S100
3. For LE(all)+SE with Cassette. P#62860-7S200
4. For LE with Fosgate 6cd/Nav/trip comp/tire pressure. P#68260-7S300

It does not give me pictures for each!!

[CaliforniaTitan]

Reading that, the part # you listed as #1 would be the one we want I believe.


The part #2 would be the one I have now that has the extra writing and openings for the mid-level 6 disk.

#3 would have the dimples?

#4 would be setup for the RF/Nav setup.

So if someone was just going for a blank plate with the doubledin opening it would be #1 right?

Anyone else agree?

chris

[Titan1027]

Hi all, anything you can do to get that R/F 6 disk, w nav out, and get a real stereo ? Love my truck, but that r/f system wow, sucks

[bestatchess]

Originally Posted by CaliforniaTitan

Jamie,

Do you have a way to check visually the two part numbers? I think one of them has the dimples for rear controls for a CC...I would be looking for a KC variety without the dimples.

Chris

What rear controls? I think only ARMADA has those.

[CaliforniaTitan]

Originally Posted by bestatchess

What rear controls? I think only ARMADA has those.

From the original thread posted by Dtek. Look at the pic he has and see the dimples in the panel. Just trying to get clear which one would be the one for a clean look.

Chris

[bestatchess]

Originally Posted by CaliforniaTitan

From the original thread posted by Dtek. Look at the pic he has and see the dimples in the panel. Just trying to get clear which one would be the one for a clean look.

Chris

Yes, I understand. But I think the dimples are only used in the Armada. I have a CC and I have no rear controls like that. So I think that dimple thing in a Titan is kind of tacky since there are no Titans with controls in those locations.

[glm1157]

A buddy of mine has an SE CC with the low end radio. He has the face plate with the double DIN hole and has the dimples.

--Gary

[Titanparts1]

Originally Posted by CaliforniaTitan

Reading that, the part # you listed as #1 would be the one we want I believe.


The part #2 would be the one I have now that has the extra writing and openings for the mid-level 6 disk.

#3 would have the dimples?

#4 would be setup for the RF/Nav setup.

So if someone was just going for a blank plate with the doubledin opening it would be #1 right?

Anyone else agree?

chris

Well, the part number that was given in the other thread is #3. Unfortunatly with no pictures, I have no way of telling. If you see a Titan with the piece that you want, grab the VIN number for me and I will get you the right part number!! I will try and look on the lot to see if any here have a double opening!!

[CaliforniaTitan]

OK we are getting closer....

Any XE owners with the bottom end radio around? Is yours just the 'flat panel'

Chris

[mtbendo]

Interesting that those dimples look like the same ones in the pictures of the "prototype" sent to the magazines for testing. One would have thought that since they removed the dimples from the other models that the XE would have been removed as well.

[MaxPowers]

I'm kinda confused too since i have number 2 on your list, an xe with 6 disc cd changer. If i wanted just the part for the doubledin opening it would be number 1 right?