Nissan Titan Forum banner

Recent content by 20TITAN04

  1. Question about installing door speakers

    Titan General Discussion
    Yes it's possible. I removed my blown rears a couple weeks ago. Helps if you have a helper to hold the door panel off to the side while your working on the speaker
  2. Any tie rods???

    Titan Suspension
    Swapped mine out with the Moog's. Just have to remember to feed them grease once in a while. Holding up good with the plowing I do. Best thing is their only $25 if I remember correctly
  3. Help with interference on remote start

    Electrical & Wiring
    I have a dealer installed remote start with the factory key fob. I know it's crap and the range isn't great but it did the job and I was happy with it. However a couple months ago I notice that I couldn't unlock the doors ( after I remote started it ) until I was 5 feet from the truck. Wasn't...
  4. Bluetooth speaker issue

    Titan Visual & Audio Discussion
    What phones do you guys have? I have the iphone 4 and could of swore it use to play out of all the speakers. But noticed a couple of weeks ago that my front pass speaker was distorting when i cranked up the volume. Then i tested the speakers while in bluetooth and found out that the rears are...
  5. Extend remote range??

    Electrical & Wiring
    My dealer installed remote start works from about 50-75 feet to start and lock/unlock the doors. The problem I have is that once i start my truck with the keyfob, i can't unlock the doors until I'm about 5 feet away from it. Is this some sort of safety feature? Any ideas??
  6. Help needed!Can't get rid of ticking in speakers

    Electrical & Wiring
    No. Problem just started happening. The kenwood has been in for 10 months
  7. Help needed!Can't get rid of ticking in speakers

    Electrical & Wiring
    I soldered them and used heatshrinks. Is it a grounding issue ? Cause I've been trying different things with the ground wire only. Could it be a power wire problem?
  8. Help needed!Can't get rid of ticking in speakers

    Electrical & Wiring
    It's a Kenwwod 9960. I used a Scosche harness to tap into factory wiring
  9. Help needed!Can't get rid of ticking in speakers

    Electrical & Wiring
    Thanks Disconnected the antenna at the HU and it's still ticking. Any ideas where/how to start looking for the problem?
  10. Anybody on long island that can help me swap mirrors

    North East Forum
    I'm off on Monday if you wanna come by
  11. Help needed!Can't get rid of ticking in speakers

    Electrical & Wiring
    Should add some more info: I had the stock rf system and changed the HU to a kenwood 9960 It DIDN'T start happening once I changed the HU. I thought it was a blown speaker so I treated myself to new CDT's from tech12, and they are still ticking. No aftermarket amps. Ran all new wire to...
  12. Help needed!Can't get rid of ticking in speakers

    Electrical & Wiring
    Only have this problem on FM when engine is running. It changes with rpm's Thing I've tried= Changed the ground location of the HU to the cross bar behind it Installed diy ground kit as per Active Tuning Upgraded ground cable from engine block to battery tray Changed and cleaned battery...
  13. Wanted: rims/tires-in good shape

    Buy/Sell
    I have the stock rims and tires that came off my truck. I had them chromed and they peeled after a couple years. With a 50 bucks in material ( sandpaper,beliner/paint ) and a little work the would look brand new. Selling them for $300 with the tpms. Im in the city but visit relatives in PA...
  14. Bolt size?

    Titan General Discussion
    Installing a DIY ground kit. Anyone know the size and length of the bolt needed to mount to the alternator?
  15. Help Replacing swaybar bushings

    Titan Suspension
    Just Ordered 2 cans.
Top