Nissan Titan Forum banner
1 - 12 of 12 Posts
Some people on here have fit them with just a leveling kit, but others have said you'll need to do the pinch weld mod due to the width of the tires. Nitto makes the Terra Grappler in a size 285/65/18 which if I'm not mistaken is the same heigh as the one you're looking at but about an inch thinner. DiscountTireDirect.com has them for about $20 per tire than you're looking at for the kumhos.
 
I think if you do the math the 325/65 is 52mm/2.04 inches taller then a 285/65.

Someone correct me if I am wrong...but I thought that the sizing explained is

325/65 = 325mm wide and 211.35mm tall sidewall (325mm x 65%) and so on. Remember that you will have 2 side walls, rubber all around the wheel.
 
  • Like
Reactions: Peytons_Titan08
I would advise against this setup. The combination of tire height and width will be a problem with just a leveling kit... you will seriously need to hack at the pinch weld... and may still be in trouble.

325-60 will fit much better.
 
They wont fit!!!!! I bought some 325/65/18's and you could hardly turn the wheel. I had to put a 3" body lift on mine for them to fit and they still rub at full lock.
 
1 - 12 of 12 Posts