Gona add ride rite 2355 air springs. by the looks of it and on this site look like a easy upgrade.
Gona Bag it
Wags145
1 - 8 of 8 Posts
ICS:teethmast
Installed the bags.took no time at all. easy to do. Took measurement of rear ride height with bags empty. Hooked up trailer used air to bring up the trailer to about same ride height. Hooked load leveler bars up. Dropped two links down on the chain. If I went up to the same link with out the bags it jacked the truck way up in the back. Down two links and bags filled to 30 to 35 lbs. ride was good truck and trailer level. O' and I ran the air lines like the others, to the plate holes. NO ISSUES . Just don't like the white colored plastic caps. They really stand out. Gona steel some black ones off the kids bike.................... Thanks for all the input.
Joined
·
28 Posts
Did you have to put spacers up front to go with the bags in the back?
i.e. do the empty bags add any height? I'm assuming they do (that, and you probably need to run 5-10 psi in them at all times)
i.e. do the empty bags add any height? I'm assuming they do (that, and you probably need to run 5-10 psi in them at all times)
Sideways, No i didn't add anything to the front. With out the air springs from ground to bottom of fender was 37 to 37 and 1//2. with 5# in the bags the truck sits at the same height. It is just a very little bit stiffer with the 5# but you very soon get use to it. I actuality i kind of like the feel.
1 - 8 of 8 Posts
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
