I bought some chrome door handles and chrome caps for the mirrors. I got the mirror swap lick, but the handles is a whole different story. Did anyone out there in the TITAN world tackle this before, especially the XE owners? I ordered them from "everythinginfiniti.com" and got a good deal on them.
Door handle replacement, HOW?
BULLTITAN
1 - 10 of 10 Posts
Joined
·
2,000 Posts
I bought some chrome door handles and chrome caps for the mirrors. I got the mirror swap lick, but the handles is a whole different story. Did anyone out there in the TITAN world tackle this before, especially the XE owners? I ordered them from "everythinginfiniti.com" and got a good deal on them.
I replaced mine. First step is to type in "door handle" in the search box.
Anyways. Inside the door just behind the handle is a small round vinyl sticker. Pull it off and loosen the screw inside, it's held in place, so don't take it out or pull on it. That will loosen the escutcheon. Pull it out. Then slide the handle to the rear of the truck and pull it out. Installation is in reverse order.
Anyways. Inside the door just behind the handle is a small round vinyl sticker. Pull it off and loosen the screw inside, it's held in place, so don't take it out or pull on it. That will loosen the escutcheon. Pull it out. Then slide the handle to the rear of the truck and pull it out. Installation is in reverse order.
Here's one place you can get them. They are actually pretty inexpensive.WazzuCoug said:
Nissanpartscheap.com
Joined
·
766 Posts
Sorry to bring this thread back from the dead, but my new post isnt getting the attention I wanted, I should have searched before...
Those of you subscribed to this thread that have done this, can I purchase one of the 3 other escutcheon covers and replace/cover my key hole on the drivers door?
My truck had an attempted break-in, in the process they mangled the tumbler beyond repair. I'd rather buy an escutcheon w/o the hole and try to forget about it...
Thanks!
Those of you subscribed to this thread that have done this, can I purchase one of the 3 other escutcheon covers and replace/cover my key hole on the drivers door?
My truck had an attempted break-in, in the process they mangled the tumbler beyond repair. I'd rather buy an escutcheon w/o the hole and try to forget about it...
Thanks!
Joined
·
766 Posts
Well, with the instructions above and some trial and error, it will work...
Trial - it will work, but you have to skin off a little bit of plastic on the inside of the cover...
Error - didnt shave any at first, cracked the clip piece...
Error 2 - shaved off too much, made it loose, not a tight fit...
Now I get to buy two, lol...
Trial - it will work, but you have to skin off a little bit of plastic on the inside of the cover...
Error - didnt shave any at first, cracked the clip piece...
Error 2 - shaved off too much, made it loose, not a tight fit...
Now I get to buy two, lol...
1 - 10 of 10 Posts
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
