Just finished installing some lighting in the footwells. Using the Nissan accessory harness ( T99F6-4RA0A) I installed amber leds for when the truck is running and white “courtesy lamp” leds to the room lamp circuit. I was a little jealous looking at my buddy’s PR that had the factory courtesy lamps. Really pleased with the results. As a bonus I also tied into the same harness to power my dashcam.
Footwell lighting in my P4x
MidTNPro4X
Just finished installing some lighting in the footwells. Using the Nissan accessory harness ( T99F6-4RA0A) I installed amber leds for when the truck is running and white “courtesy lamp” leds to the room lamp circuit. I was a little jealous looking at my buddy’s PR that had the factory courtesy lamps. Really pleased with the results. As a bonus I also tied into the same harness to power my dashcam.
1 - 15 of 15 Posts
Just finished installing some lighting in the footwells. Using the Nissan accessory harness ( T99F6-4RA0A) I installed amber leds for when the truck is running and white “courtesy lamp” leds to the room lamp circuit. I was a little jealous looking at my buddy’s PR that had the factory courtesy lamps. Really pleased with the results. As a bonus I also tied into the same harness to power my dashcam.
Joined
·
921 Posts
Sweet! Now you need one of these.😈
![Image]()
![Image]()
Joined
·
921 Posts
And one for busemans.
![Image]()
I do need those!!
Joined
·
921 Posts
That's better than the $350 charge when getting them on a new truck!
That looks great!
What footwell lights did you buy and from where? I gotta do this.
Here are the amber leds I used:
Prewired Surface Mount LEDs (2835, Amber LED) - 3 Pack https://a.co/d/2EOecCN
These are the white:
LEADTOPS 10Pcs 18mm 12V Eagle Eye LED Car Fog DRL Daytime Running Light Backup Reverse Tail Rock Lights Small bulb (White, Black Case) https://a.co/d/bACc37M
The amber I just taped into place once I had them positioned how I liked since they are so light weight. The white I installed in the factory hole using a washer on each side since the se are a little smaller than the hole. I wired them to the Nissan accessory harness. Amber to ignition & ground / white to room lamp / battery saver.
Any chance you’d like to include so install pictures?
Sorry, I didn’t take any while doing , just after. I might put some in my buddies Titan and if I do I’ll def take pictures.
Joined
·
6 Posts
Older post I realize, but is that amount of AMBER light from a single 2835 or is it a 3 pack on each side?
Joined
·
1,817 Posts
Awesome thread! I just ordered the same T99F6-4RA0A adapter on eBay, going to do this same upgrade soon.
My suggestion is to use the weakest LED you can get for ambient lighting. Or, add a dimmer to the LED circuit so you can adjust it.
Joined
·
6 Posts
Thanks. That seems pretty impressive to me that 1 little 2835 puts out that much light and yes, that seems like like plenty
I have the accessory harness on the driver's side I used for my rock lights. I get the circuits you wired to for roomlamp, but what leds did you use?
I have the accessory harness on the driver's side I used for my rock lights. I get the circuits you wired to for roomlamp, but what leds did you use?
1 - 15 of 15 Posts
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
