08 ABS Sensor Problems
Ok this is pissing me off now. I was having problems with my ABS sensors. Both the fronts got changed out at least once this last year as every time I’d hit the truck with water they’d come on for a while. I had a good run with them off I must say. Last time I maintained them, dielectric grease then wrapped with electrical tape from about 2 inches below and above the connector. They stayed off for 3 or more months.
This morning driving to work, in the snow ABS light comes on again. I did change the front pads two weeks ago. But no light until today. The wheel bearings have no play in them. There is no damage to the wiring before entering the wrapped loom. Brake fluid levels are good.
What else am I missing? I really need my ABS and more so my 4x4 this time of year as it’s hunting season. Someone please help me figure this out.
This morning driving to work, in the snow ABS light comes on again. I did change the front pads two weeks ago. But no light until today. The wheel bearings have no play in them. There is no damage to the wiring before entering the wrapped loom. Brake fluid levels are good.
What else am I missing? I really need my ABS and more so my 4x4 this time of year as it’s hunting season. Someone please help me figure this out.
1 - 1 of 3 Posts
1 - 1 of 3 Posts
- This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Nissan Titan Forum
Nissan Titan Talk Forum is a community for truck owners to discuss the Titan Cummins, Warrior, Midnight Edition and more!
Full Forum Listing
