Nissan Titan Forum banner
Cancel

'08 PRO 4X Questions

845 Views 7 Replies 7 Participants Last post by  sportbiker929, 
SmokeEater829
I've got a few questions that I'm hoping some of my fellow Titan owners can help me with. First of all, does anyone know if a bull/safari bar can be installed on an 08 Pro4x without losing the factory skid plate? Also, I'm wondering if it is possible to add the utility tracks in the bed and if so what would the cost be? And lastly, my Titan has some unused buttons located next to the Elocker and Tow mode buttons. I was wondering if these unused spaces can be fitted with factory buttons? I'm a volunteer firefighter (hence the red truck) and I'd like to use those locations as switches for my emergency lighting.
Thanks for any help you can give.
Scooter
Reply
Save
Like
1 - 8 of 8 Posts
C
SmokeEater829 said:
I've got a few questions that I'm hoping some of my fellow Titan owners can help me with. First of all, does anyone know if a bull/safari bar can be installed on an 08 Pro4x without losing the factory skid plate? Also, I'm wondering if it is possible to add the utility tracks in the bed and if so what would the cost be? And lastly, my Titan has some unused buttons located next to the Elocker and Tow mode buttons. I was wondering if these unused spaces can be fitted with factory buttons? I'm a volunteer firefighter (hence the red truck) and I'd like to use those locations as switches for my emergency lighting.
Thanks for any help you can give.
Scooter
Click to expand...

Not sure what it costs to add Utilitrak. You can install aftermarket rocker switches in the blank positions on your dash. Follow this link, and click on On-line Store, then Dash Switches, then 40 Series.

http://4x4mods.com/

I have these switches. I bought them a couple months ago, but haven't installed them yet. I'm contemplating buying a new truck so I don't want to do the same thing twice. Anyhow, hope that helps.

Trace
Reply
Save
Like
C
not sure on the utilitrac system but i know it is pretty hard to find a bull bar that does not require removing the skid plate i know your best bet is to contact westin and ask them they are about the best on the market
Reply
Save
Like
WillieFlo
I would like to add the Utilitrac to mine as well.
Reply
Save
Like
54warrior
You can purchase the individual parts/pieces for a utilitrac install for close to $400 buckaroos. Some have been able to find used stuff for much less though, but when that stuff pops up for sale on here, it's gone in minutes.

There is a write up on here about how to do it, I couldn't locate a link for it though.
Reply
Save
Like
C
very hard to find on that mounts without removing skid plates i know they make some that use the tow hooks but the plate might still have to be removed i know you can also buy bull bars that have skid plates built in that would replace your factory one
Reply
Save
Like
Rolex
I just bought a PX4 with the trac system installed, so it can be done. Mine came as part of a package that included sprayed on bed liner, trac system, and a 12 volt power point in the bed for $800.
Reply
Save
Like
S
Rolex said:
I just bought a PX4 with the trac system installed, so it can be done. Mine came as part of a package that included sprayed on bed liner, trac system, and a 12 volt power point in the bed for $800.
Click to expand...
me too.......
Reply
Save
Like
1 - 8 of 8 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Nissan Titan Forum
Nissan Titan Talk Forum is a community for truck owners to discuss the Titan Cummins, Warrior, Midnight Edition and more!
Full Forum Listing
Explore Our Forums
Titan General Discussion Buy/Sell Titan Performance Modifications Titan Suspension Titan Parts & Accessories
Top