Nissan Titan Forum banner

2008 Dana 44 Rear Axle Rebuild

1739 Views 2 Replies 3 Participants Last post by  titan14
Is there anyplace I can get all of the specs to rebuild my rear axle (Ring/Pinion, all bearings). Torque, Pre-load, Backlash,,, All the stuff to make an axle happy and last longer. Thanks in advance.
1 - 1 of 3 Posts
I have the fsm on my iPad at home, but it's available online if you look around.
I'm thinking the backlash is like .007-.012 or something. Pinion preload may have been about 20 inch pounds with the combined preloaded at about 45....dont take my word for it though.
1 - 1 of 3 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.