Nissan Titan Forum banner

1 - 3 of 3 Posts

·
Registered
Joined
·
2 Posts
Discussion Starter #1
Hi guys, i went about replacing my stock radio with a Pioneer AVH-X3800BHS. Everything has gone well until i was looking at wiring the factory XM satellite radio back into the after market HU. I understand that the factory XM unit is behind the brake peddle, but i dont exactly see which wire i need to pull from that unit to connect to the x3800bhs. The connectors on the stock HU and the aftermarket at 100% different. What simple thing am i missing?

Thank you very much for your help!
 

·
Registered
Joined
·
684 Posts
The simple fact is that the factory XM receiver ONLY works with the factory radio. You will need an XM adapter that works with the aftermarket radio.
 
1 - 3 of 3 Posts
Top