I currently have 5100's set on the middle perch but I am wanting to install a 1.5 inch leveling kit and put the 5100's on the lowest setting. Will I need new UCA's to do this? Any advice/help would be greatly appreciated.
2015 Pro 4x 1.5 inch leveling kit and 5100's???
1 - 8 of 8 Posts
Joined
·
831 Posts
Just get prg drop shackles and lower the rear 1.5. It will be level and you won't spend nearly the money you are about to on ucas
Sent from my SM-G900V using Tapatalk
Joined
·
359 Posts
If you drop the Bilstein's back down to stock height and put a 1.5" spacer on, it could be hit or miss on if you need UCA's. There are a lot of people that have done it with no CBC. My 15 Titan had a 1.5" spacer on it and I had CBC. I tried grinding the lip down a little at first, but that didn't help. I ended up having to get DK uppers and they were excellent.
Joined
·
8,304 Posts
Get the DK UCA's keep the billies on middle perch, throw on the 1.5" spacer and get a 1.5" block for the back, problem solved...
Joined
·
14,458 Posts
why would you do that to a pro4x. TERRIBLE ADVICE. lol. don't need that negativity on here!
Joined
·
831 Posts
He asked for advice. I'd gave him mine. If it were me and my pro-4, I would leave it alone after drop shackles...maybe do 5100's like he has already done to get rid of oem shocks but that's about it. I would stay away from any sort of blocks...to me that is terrible advice.
1 - 8 of 8 Posts
