Nissan Titan Forum banner
1 - 7 of 7 Posts

· Registered
Joined
·
106 Posts
Discussion Starter · #1 ·
Hello everyone I have a question about the heat in other trucks like mine, when I set the heat to 18.5 it starts heating up like crazy, then move it down to 18.0 and starts blowing cold air but seems like there is no gradual setting, when I use 18.5 seems like it blows air as hot as I set it to 30 degrees (Celsius)


Sent from my iPhone using Tapatalk
 

· Registered
Joined
·
170 Posts
Hello everyone I have a question about the heat in other trucks like mine, when I set the heat to 18.5 it starts heating up like crazy, then move it down to 18.0 and starts blowing cold air but seems like there is no gradual setting, when I use 18.5 seems like it blows air as hot as I set it to 30 degrees (Celsius)


Sent from my iPhone using Tapatalk
LOL...I just noticed yesterday mine does the same thing. I had a long day and was headed home and getting drowsy so I dialed 'er down to 18c....waaaaaay cold. Turned to 18.5c and was like full warm. Drove in today with it set at 19c and seemed to be about right. Weird. First issue I've had with the truck....
 

· Registered
Joined
·
31 Posts
Going to have to try this too, as the temperature is set to drop here for the rest of the week.

How are your seat heaters? The XD that I test drove roasted my butt quite nicely, but the ones on the truck i bought (regular Titan PR) are pretty anemic. Set to high, the seat back gets only luke-warm and the seat bottom does very little at all.
 

· Registered
Joined
·
106 Posts
Discussion Starter · #6 ·
Just an update, I took the truck to the dealer on Friday and there was definitely an issue with the heat, they fixed it and now it gradually heats up as you turn the temperature dial up. When I get home from work I can look at the paperwork and give you more details on what they did specifically


Sent from my iPhone using Tapatalk
 
1 - 7 of 7 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top