[Cammac1989]

I have a 2017 Titan SV with the halogen headlights.

Looking to see if anyone has looked into converting from the Halogen lights to the LED HID headlights found in the Pro-4x, SL & Platinum.

Would it be as simple as plug & play?

Found some online & prices aren't bad.

NISSAN TITAN XENON RH HEADLIGHT 16 17 2016-2017 OEM | eBay

 

[Tristan Downey]

Let me know if you find anything. I've had pretty good success with buying LED bulbs for my SV and they look OEM.

 

[Cammac1989]

I will for sure. The local dealership isn't sure if it would work.

Mind if I ask where you purchased the LED bulbs? Have you had any issues? Any pictures of the truck with them on?

 

[BlueCrush]

Really hoping this works out for you. I have been extremely curious about this myself. The Nissan parts website wasn’t the best help, but I was told the wiring harness is the same.


Sent from my iPhone using Tapatalk

 

[terry32506]

If you convert test them out at night for levelness. I have the SL model and having issues with them lining up. I hope this is not a factory fault, I am researching this and in contact with Nissan about it to find out whats going on. I have posted in here about it hoping to get more input on other owners with these lights. By the way Nissan Canada retails these lights for 2450.00 each! You read that correct 2450.00 each! I just had my set replaced under warranty a whopping 5200.00 bill sent to Nissan.

 

[BlueCrush]

If you convert test them out at night for levelness. I have the SL model and having issues with them lining up. I hope this is not a factory fault, I am researching this and in contact with Nissan about it to find out whats going on. I have posted in here about it hoping to get more input on other owners with these lights. By the way Nissan Canada retails these lights for 2450.00 each! You read that correct 2450.00 each! I just had my set replaced under warranty a whopping 5200.00 bill sent to Nissan.

Most projectors don’t line up exactly. Most are a little higher on the right side.


Sent from my iPhone using Tapatalk

 

[terry32506]

Ok that is good to know. The film/finger prints on them is unacceptable. Our Rogue is crystal clear all 4 projector bulbs. I did look at a new Titan XD and it too had one lense that seemed to have some sort of film on it. A simple clean up of the lens is all that would need to be done but with a sealed unit it seems impossible to achieve.

PS. Our Rogue headlight beam is straight across even light and no oncoming traffic flashing their lights at us, go figure

 

[Tristan Downey]

I will for sure. The local dealership isn't sure if it would work.

Mind if I ask where you purchased the LED bulbs? Have you had any issues? Any pictures of the truck with them on?

This is the kit I purchased for my Titan: https://kensun.com/products/led_kit_h11_super_bright_with_eti_led_chips

I've had no complaints. The distant viewing is great and I'm not flashed by people and everyone who's seen the truck just assume they are standard. The light looks a lot like the new LED lights on the F150 Lariat. For plug and play the price can't be beat.

 

[terry32506]

This is the kit I purchased for my Titan: https://kensun.com/products/led_kit_h11_super_bright_with_eti_led_chips

I've had no complaints. The distant viewing is great and I'm not flashed by people and everyone who's seen the truck just assume they are standard. The light looks a lot like the new LED lights on the F150 Lariat. For plug and play the price can't be beat.

Did you get them for both your low beam headlights and fog lights? I want to swap out the halogen fogs and low beams and want to know if these will match the color tone to the LED's.

 

[terry32506]

I am looking at these for the high beam LED 9005 (HB3) Conversion Kit with Cree Chips.

And these for the fog lights LED H11 Conversion Kit with Cree Chips.

They are both an all in one plug n play. Has anyone used these LED's on their Titan?

Link is here. https://kensun.com/search?type=prod...2017 NISSAN Titan w/LED H/L&high=9005&fog=H11

 

[Devildog95]

I am looking at these for the high beam LED 9005 (HB3) Conversion Kit with Cree Chips.

And these for the fog lights LED H11 Conversion Kit with Cree Chips.

They are both an all in one plug n play. Has anyone used these LED's on their Titan?

Link is here. https://kensun.com/search?type=prod...2017 NISSAN Titan w/LED H/L&high=9005&fog=H11

I have a 17 Platinum R, Looks like the fogs and high beams are not LED, correct? Can you just get the high beam leds?

Thanks

 

[terry32506]

I have a 17 Platinum R, Looks like the fogs and high beams are not LED, correct? Can you just get the high beam leds?

Thanks

High beams and fogs are halogen and apparently some have gone with LED which is what I want to do but not sure which brand to go with without having error issues. Some give errors some will not I am hearing.

 

[Tristan Downey]

Did you get them for both your low beam headlights and fog lights? I want to swap out the halogen fogs and low beams and want to know if these will match the color tone to the LED's.

No I got them just for the low beams. I wanted a more OEM look and I don't run with the fogs often so if I had the SL or Pro4X their fogs are halogens so mine looks the same at night. But the headlights are far superior. It doesn't look fake, looks more like an Acura or other model which uses LEDs.

 

[terry32506]

No I got them just for the low beams. I wanted a more OEM look and I don't run with the fogs often so if I had the SL or Pro4X their fogs are halogens so mine looks the same at night. But the headlights are far superior. It doesn't look fake, looks more like an Acura or other model which uses LEDs.

I need to correct myself when I asked if you got them just for the low beams. I actually meant to say for the high beams as the low beams are LED. So correct me if I am wrong you replaced the high beam halogen bulbs for the Kensun LED bulbs and they look about the same color/brightness as the LED low beams?

 

[MrMischief]

This is the kit I purchased for my Titan: https://kensun.com/products/led_kit_h11_super_bright_with_eti_led_chips

I've had no complaints. The distant viewing is great and I'm not flashed by people and everyone who's seen the truck just assume they are standard. The light looks a lot like the new LED lights on the F150 Lariat. For plug and play the price can't be beat.

Have you had a chance to drive with them in snow? My car has factory LEDs (both low and high beams) and they don't seem to be heated in anyway so when I drive in a snowstorm it takes almost no time for snow to build up on the lights so much that the road is no longer illuminated.

 

[Tristan Downey]

Did you get them for both your low beam headlights and fog lights? I want to swap out the halogen fogs and low beams and want to know if these will match the color tone to the LED's.

I need to correct myself when I asked if you got them just for the low beams. I actually meant to say for the high beams as the low beams are LED. So correct me if I am wrong you replaced the high beam halogen bulbs for the Kensun LED bulbs and they look about the same color/brightness as the LED low beams?

SV trucks comes with standard halogen all around. I put LEDs in the low beam so that I get a better brighter view when I drive. I did not change the high beam halogen light. SL, Pro4x and Platinum have a Xenon HiD light for low beams and halogens for high beams.

 

[terry32506]

SV trucks comes with standard halogen all around. I put LEDs in the low beam so that I get a better brighter view when I drive. I did not change the high beam halogen light. SL, Pro4x and Platinum have a Xenon HiD light for low beams and halogens for high beams.

Interesting that you said the SL, Pro4X and Platinum have the Xenon HID light for low beams. I have the SL model and my service manager says the low beams are LED. Where did you get that information from, a website or? I would like to give that information to my service manager. I am having issues with my projectors and it would be helpful to clarify this info your saying to him.

 

[Tristan Downey]

Interesting that you said the SL, Pro4X and Platinum have the Xenon HID light for low beams. I have the SL model and my service manager says the low beams are LED. Where did you get that information from, a website or? I would like to give that information to my service manager. I am having issues with my projectors and it would be helpful to clarify this info your saying to him.

Sorry, I should have said LED for low beams on SL, Pro4X, and Platinum. High beams are halogen. No errors, etc.

 

[terry32506]

Sorry, I should have said LED for low beams on SL, Pro4X, and Platinum. High beams are halogen. No errors, etc.

Ok thanks for the clarification

 

[TexasBrandon]

Yeah definitely LED for low beams on the SL. I'm looking to add LEDs to my fogs on my SL But I'm worried about scatter. I just feel like that the SL and Reserve being the top trims, it should have came that way. Small gripe in the run of things though, everything else is fantastic.