Nissan Titan Forum banner

1 - 4 of 4 Posts

·
Registered
Joined
·
2 Posts
Discussion Starter #1
After going through a litany of problems in this truck I finally have it sorted enough to start making it mine. Today the wheels showed up for the tires I've had laying in my basement for several months waiting to go on so I fired up the old tire machine and barely squeezed these things on. I went with the Vision Nemesis in 18x9 +18 and the Yokohama Geolandar X-AT in a 295/70R18. No lift/level yet, just a stock 08 Pro4X and at getting near full lock the left hand tire just barely touched the pinch weld. I have some 5100's to put on the front which I may run on the lower perch after reading about the harsh preload with the 4X springs but I have some 1.5" leveling spacers already sitting around for it.
543248

543249
 

·
Registered
Joined
·
146 Posts
looks good starting on my 12 pro-x with bills 5100 im going for mid position with 11/2'' spacer used this setup on my 07 SE but used a 2'' lift spacer instead road good but with the pro x springs my be diff ? having installed the bills on mid setting and 11/2 spacer ride has become firmer with 40psi empty in the rear air bags makes the truck ride an feel like driving a truck not a car.
IMG_20200401_101802799.jpg
 
1 - 4 of 4 Posts
Top