Nissan Titan Forum banner

1 - 5 of 5 Posts

·
Registered
Joined
·
105 Posts
Discussion Starter #1
I am looking to put a 3 inch level on a 2wd with a 1.5 rear block and i was wondering if what size tire i could put on it with out pinch. Does any one have a pic of their truck like this
 

·
Registered
Joined
·
784 Posts
i'd say 33's with stock wheels.
 

·
Registered
Joined
·
61 Posts
Hey, I recently just added Toyo 35's to my 2wd. Will try to post pics this weekend. They were pretty used so the tread is not 100%, but will be buying new ones soon. I have the 2.5" level kit from PRG, 3" body lift, I did not add anything to the rear..and the 35's on after market 18's. We did not have to cut or do the pinch weld mod. Hope this helps.
 

·
Registered
Joined
·
745 Posts
35's with the pinch weld mod...33's without...With just the 3 inch RC level you can fit the same size tires I got with zero problems. You dont need the 1.5 rear blocks either, you could just run the 3 in the front and get away with either size tire by either doing the pinch weld or not.
 
  • Like
Reactions: boardboy

·
Registered
Joined
·
105 Posts
Discussion Starter #5
Will 325/60-18 fit with out pinch and weld mod on my rbp 18x10 with 10 offset
 
1 - 5 of 5 Posts
Top