Nissan Titan Forum banner

1 - 10 of 10 Posts

·
Registered
Joined
·
50 Posts
Discussion Starter #1
Hey i have a 2011 pro4x with 5100s on top purch with prg upper control arms and 1 inch block in rear.

Wana buy 325/65r18 wrangler duratracs just dont know if they will fit i have aftermarket rims dont know there offset. I have 305/65r18 kos on there now and there looks like there is enough room.
 

Attachments

·
Registered
Joined
·
14,137 Posts
turn the steering wheel about 3/4 and see where the tire wants to rub at the fender/PWM area. If you have more then 2" of space you'd probably be fine. But i bet you'll rub a decent amount.
 

·
Registered
Joined
·
1,665 Posts
You would think that with this much space I should have plenty of clearance right? Nope! Still rubbed so I had to go back in and trim some more. Looking at yours I'm sure you'll need to do trimming as well. Just like Honda said, turn your wheel and measure how far your tire is from the fender.

 

·
Registered
Joined
·
2,942 Posts
You gonna hit frame.
 

·
Registered
Joined
·
50 Posts
Discussion Starter #5
What do i need to trim and what if i take out the fender liner? I turned the wheel and it has about a inch of from i can get my finger inbetween the fender liner and the tire.
 

·
Registered
Joined
·
2,942 Posts
Search pinch weld mod, you'll find a how to or three.
 

·
Registered
Joined
·
1,665 Posts
325's is a big difference than your 305's and if you only have a finger now than you'll be doing some serious trimming to get those 325's to fit. Search PWM MOD like mentioned bit you'll probably need to trim the bottom fender as well.
 

·
Registered
Joined
·
14,137 Posts
x2 on the rubbing the frame comment. Not a big deal, its like a steering stop lol.


You would think that with this much space I should have plenty of clearance right? Nope! Still rubbed so I had to go back in and trim some more. Looking at yours I'm sure you'll need to do trimming as well. Just like Honda said, turn your wheel and measure how far your tire is from the fender.

your offset also makes the radius MUCH bigger. so thats why.
 

·
Registered
Joined
·
50 Posts
Discussion Starter #9
Damnn it nvm to much hassel for looks. Another question anybody use the new ko2s in snow and mud trying to get a good review from someone who dos moderate offroading. The ko1 suck *** in the snow havnt tried them in mud yet. If anyone has pics of 305s or 315s that would be awsome.
 

·
Registered
Joined
·
1,665 Posts
x2 on the rubbing the frame comment. Not a big deal, its like a steering stop lol.




your offset also makes the radius MUCH bigger. so thats why.
-24mm offset here at the time. I'm guessing with a -12 or + offset rubbing wouldn't be too much of an issue
 
1 - 10 of 10 Posts
Top