[Slims]

Which spacers do you put on a 2013 pro4x? I believe i have the 2in spacers amd they are causing problems. Arr the 2 in supposed to be safe for my year?

Sent from my SAMSUNG-SM-G890A using Tapatalk

 

[dubyam]

Any 4x4 2008 and up is limited to 1.5" with stock upper control arms. Go higher means aftermarket UCAs.

 

[Slims]

I have been running 2in and I'm finally noticing damage. I called the shop that put them on and they said they would look into it and call me back first thing in the morning.

Sent from my SAMSUNG-SM-G890A using Tapatalk

 

[FishnAlaska]

yeah, 1.5" is max on an 08+ with OEM arms. Your upper arms are hitting the coilbucket. Eventually.....

 

[Slims]

What brand 1 1/2 spacers work for the pro4x?

Sent from my SAMSUNG-SM-G890A using Tapatalk

 

[Slims]

The shop is willing to pay for 1 1/2 spacers to stop farther damage. They don't see any in their book that are recommended or they think will work.

Sent from my SAMSUNG-SM-G890A using Tapatalk

 

[Slims]

The control arm is cracked. There isn't much holding it

Sent from my SAMSUNG-SM-G890A using Tapatalk

 

[danman]

The control arm is cracked. There isn't much holding it

Sent from my SAMSUNG-SM-G890A using Tapatalk

A set of rc control arms just sold on here last week too

 

[LaxDfns15]

As long as they're billet aluminum spacers you're fine. If your UCA's are already cracked might as well just get aftermarkets and leave the 2" spacers on.

 

[Slims]

As long as they're billet aluminum spacers you're fine. If your UCA's are already cracked might as well just get aftermarkets and leave the 2" spacers on.

Got a brand?

Sent from my SAMSUNG-SM-G890A using Tapatalk

 

[SouthernLion]

Dirt King

 

[LaxDfns15]

Don't need a specific brand. The reason a lot of them say not compatible with the Pro-4X is because they might cause coil bucket contact.