Traction bars are recommended or you will break a few transmission mounts from the axel wrap caused by the new angle of the drive shaft. I would also recommend the drive shaft spacer from PRG.
PRG Products
PRG Products
6" lift on a 13' Pro 4X question
Just wondering what additional mods would need to be made when installing a standard 6" lift (PC or RC). I'm assuming the lift kit package would come with all you need, but I could be wrong. Im looking to swap out my stock rims and tires for 20's (-12 or -24 offset) and 35" tires. Any help would be appreciated!
I have seen the lifts going for about $1K which seems reasonable. If there is a less expensive way to go about it, feel free to chime in!
I have seen the lifts going for about $1K which seems reasonable. If there is a less expensive way to go about it, feel free to chime in!
1 - 1 of 4 Posts
1 - 1 of 4 Posts
- This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Nissan Titan Forum
Nissan Titan Talk Forum is a community for truck owners to discuss the Titan Cummins, Warrior, Midnight Edition and more!
Full Forum Listing
