Nissan Titan Forum banner

1 - 3 of 3 Posts

·
Registered
Joined
·
1,147 Posts
Discussion Starter #1
I don't want to lift my titan too tall, 4" at the very most. The problem is I'm a little broke with too many toys, so I've been selling parts off my bike and EVO to be able to purchase a good set of coilovers and shocks and maybe deavers down the road. Now I've been looking at the 2" radflow coilovers ($699) and bilstein shocks. How good are the 2" radflow coilovers over the saw's ($999)? Is it worth the money to get the saw's? Also, are the total chaos uca just for clearance or can I just use the stock uca's?
 

·
Registered
Joined
·
6,373 Posts
For the SAW's you need the uppr control arms. The SAW's give you more travel in droop, and this needs the aftermarket upper arm.
I don't know about the 2" Radflos, but the DR's will work with factory upper arms. Of course the DR's are more expensive...
 

·
Registered
Joined
·
3,410 Posts
There are now 2 SAWs for no bracket lift trucks. The shorter one does not need a new upper.

The longer SAW requires the arm and that shocks gives an extra inch of bump travel.
 
1 - 3 of 3 Posts
Top