ABS, slip & tire air pressure sensor fix.

4403 Views 9 Replies 5 Participants Last post by buckeye96, Sep 16, 2019

FrontierMan

Discussion Starter · Sep 4, 2019

How hard is it to replace the tire pressure, slip and abs censors? I'm having a few minor issues with sensors my '08 Titan 4x4. It starting when the air pressure warning light flashed a few times and has been on solid ever since. The air pressure is fine and the book says if it stays solid it's a sensor. Not much longer after that the abs and slip lights came on. I'm fairly certain it's because of some heavy duty rust.
Any advice is greatly appreciated!

NoJo
John 3:16

Save

1 - 1 of 10 Posts

PanhandleStrong

· #6 · Sep 13, 2019

buckeye96 said:
So the ABS/Slip is due to failure of the abs sensors at the corners. I've been dealing with it off an on. This time the error happens intermittently and the mechanic thinks there is a nick in the wire before the wire splits to go to the rear wheels. The tire pressure sensor just needs to be replaced.

I am going through the same issues, but I replaced all 4 tms and after a week it came back on so what do I do now.....?

Save

1 - 1 of 10 Posts

This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.

Top Contributors this Month