Nissan Titan Forum banner
1 - 20 of 24 Posts

· Registered
Joined
·
2,954 Posts
Discussion Starter · #1 ·
WOW. That's all I have to say. I just got my magnaflow muffler swap done and that has to be the best mod out there. ANYONE that wants an inexpensive modification that will give you really nice sound and a very nice butt dyno result I highly suggest this. Bought the muffler for $62 and got it installed for $50. That's $112 for very noticeable gain in power and nice throaty sound.

I was going to look at a full cat-back system in a couple years but I think if anything I'll stick my money into some new cams.
 

· Registered
Joined
·
2,954 Posts
Discussion Starter · #2 ·
Just went for another ride and yes, I can now burn the tires for about 5' from a standstill. Unreal.
 

· Registered
Joined
·
2,954 Posts
Discussion Starter · #4 ·
I get some resonance at 1600rpms when going from 22-27 mph. At 72 it's kinda loud too but I think 72 is just the sweet spot for that sound. 68 and 75 are quiet.

Also - my instant mpg looks like I get at least 3mpg more. At 30mph on cruise control and at 55mph on cruise it says 24mpg!
 

· Registered
Joined
·
674 Posts
anmut said:
I get some resonance at 1600rpms when going from 22-27 mph. At 72 it's kinda loud too but I think 72 is just the sweet spot for that sound. 68 and 75 are quiet.

Also - my instant mpg looks like I get at least 3mpg more. At 30mph on cruise control and at 55mph on cruise it says 24mpg!

As far as the 24mpg.......pretty sure that aint happening...I have had the Mag and the CAI now and still only get 350 miles per tank if I baby it.....15mpg more real. But if you got some secrets your hiddin....please tell us...i would love just once to see 17 mpg....LOL

Congrats
 

· Premium Member
Joined
·
4,223 Posts
so what muffler is it ?? model number ?? what do they have to do to install it.. Do the hav to chop a bunch of pipe any info would help.. thanks
 

· Registered
Joined
·
2,954 Posts
Discussion Starter · #8 ·
rgregory1965 said:
As far as the 24mpg.......pretty sure that aint happening...I have had the Mag and the CAI now and still only get 350 miles per tank if I baby it.....15mpg more real. But if you got some secrets your hiddin....please tell us...i would love just once to see 17 mpg....LOL

Congrats
Like I said though - that's the instant mpg meter on the truck at exactly 25mph and 55mph. At below or above it gets down to near 20. But hey, I'll take 20!

I'll have to do a little math the next time I fill up.
 

· Premium Member
Joined
·
4,223 Posts
did you change the end of the pipe to make it look better than that curve
 

· Registered
Joined
·
2,954 Posts
Discussion Starter · #10 ·
adkl1 said:
so what muffler is it ?? model number ?? what do they have to do to install it.. Do the hav to chop a bunch of pipe any info would help.. thanks
Here's the muffler:

http://www.hottexhaust.com/detail.asp?PRODUCT_ID=12258

Model number is 12258

To install it they cut out the old muffler and had to bend the two pipes coming off the headers (no Y pipe on the 07/08 models) in slightly right before they get to the Magnaflow. The bend is maybe 3*. No chopping pipe - with the 18" it went as a direct replacement.

Probably as far as putting it in, welding the new muffler in its place is probably the hardest part.
 

· Registered
Joined
·
2,954 Posts
Discussion Starter · #11 ·
adkl1 said:
did you change the end of the pipe to make it look better than that curve
If you mean the final pipe in the exhaust system - no. I left it the same because it points at pedestrians and people in the right lane. Hehehe

I do want to find a tip for it though but $60-70 for a magnaflow tip is more than the muffler. There's a local guy that makes stainless tips that I might install down the road. As far as looks though I like having the sleeper truck. Looks stock on the outside until I floor it. No dumb stickers or coffee can pipes stick on the back.
 

· Premium Member
Joined
·
4,223 Posts
thank a bunch
 

· Registered
Joined
·
69 Posts
anmut said:
No dumb stickers or coffee can pipes stick on the back.

Kinda like the Ram I saw today with the K&N sticker on the window. No, not the window sticker but the "place this sticker on your air cleaner so the technicians wont throw away your permanent filter" sticker.
 

· Registered
Joined
·
2,954 Posts
Discussion Starter · #14 ·
HAHAH! The little octagon one - that is funny!
 

· Registered
Joined
·
6,413 Posts
Welcome to the M/F Club! I run a 24" x 3" SISO M/F. I don't know any other Titan with this setup. Love the performance. :)
 

· Registered
Joined
·
2,954 Posts
Discussion Starter · #17 ·
There's a drone but it doesn't exist hardly at all on the low end and only within 1-3mph on the high end.

I read something about exhaust grounding kits that were supposed to counter-act any drone. Would be interesting to try.
 

· Registered
Joined
·
6,867 Posts
TitanBlue said:
Welcome to the M/F Club! I run a 24" x 3" SISO M/F. I don't know any other Titan with this setup. Love the performance. :)

You might not be the only one in the near future. I'm getting a new 40-1400 JBA catback delivered tomorrow. I really like the Magnaflow 18" I have on now, but if the JBA muffler doesn't sound similar to the Mag, I see a 5x8x24 going in with the JBA piping. The 24" Mag is 1" longer overall, part# 12279.
 

· Registered
Joined
·
58 Posts
Hey Anmut,

I hear you man, I just had the Magnaflow 14" put on my '07 and the sound blows my neighbors Flowmaster 50 on his '07 away. He couldn't beleive the sound difference in the 2 trucks. He wished he would have gone with the Magnaflow.
 

· Registered
Joined
·
10 Posts
Ya just got the 3" Magnaflow Dual in/out (18", part #12469) installed with 3" pipe on my 07 and it is so nice. Sounds great and noticeable power difference along with the Brute Force. The 3" is a little more expensive and I did a little more than just a muffler swap with adding the 3" pipe, but my exhaust is hidden away underneath, dropped just over the rear axle. Gotta love the Titan!
 
1 - 20 of 24 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top